Aerocool Delta-G-BK-v1 Midi-Tower, Tempered Glass - black [ACCM-PV45013.11]

- Tempered glass side panel
- Front panel with ventilation grille for optimal airflow
- Space for optional fans on the power supply cover for additional cooling
- Radiators at the back possible
- Graphics cards up to a length of 307 mm possible
- Maximum CPU cooler height of 155 mm
- Airflow-optimized midi tower with tempered glass

With Aerocool's Delta-A-BK-v1, you don't compromise when it comes to cooling your components. It is equipped with a power supply slot and well prepared for cooling airflow through the triangular opening in the front.

The side panel is made of tempered glass and allows a good view of the installed components. With the I/O panel located at the top, you have easy access to the data and audio ports.

Good airflow and power supply bay
During the development of the Delta-A-BK-v1, Aerocool focused from the outset on cooling the components. The housing is very open and designed for trouble-free airflow. The front has a mesh in the shape of a perforated grille in the triangular recess and thus ensures a good air flow. An integrated 120mm fan on the back carries the heated air out of the case.

There is space for three 120mm fans on the front, two 120mm fans on the lid and a 120mm fan on the back. Two 120mm fans can also be mounted on the power supply cover to further improve the airflow in the case. Against dust, there is also an easy-to-clean dust filter on the floor.

The power supply cover shields the power supply from the rest of the chassis. This ensures that the waste heat from the power supply does not enter the main chamber of the case, where the other warm components are located and thus lower temperatures are achieved inside the housing.

Designed for air cooling
The Delta-A-BK-v1 offers the possibility to install ATX, Micro-ATX and Mini-ITX motherboards. Thus, you have a large selection of platforms and configurations. In addition, CPU coolers up to a height of 155 mm and high-end graphics cards up to a maximum length of 307 mm can be accommodated.

For CPU loops with corresponding radiators, there is space on the back of the case. Heat exchangers up to a size of 120 mm are possible here.

Plenty of space and simple design
Two 3.5- or two 2.5-inch data carriers can be accommodated under the power supply cover. Thus, enough memory is available. For power-hungry hardware, optional ATX power supplies up to 151 mm in size can be placed under the cover.

The black design of the Delta-A-BK-v1 combined with the RGB lighting on the front panel makes it possible to build stylish builds with good cooling performance. It is controlled by a button on the housing. The housing is made of hardened, 0.5 mm thick SPCC steel, which gives the case its robustness. The side panel is made of tempered glass, which is why it provides a good view of the internal components. The I/O panel does not let fans of mobile data carriers down. It comes with power button, reset button, HD audio and microphone port, as well as two USB 2.0 and one USB 3.0 Type-A port for faster file transfer. For cable management, there is still 17.3 mm of space behind the motherboard tray.

Specifications:
- Dimensions: 188 x 420 x 310 mm (W x H x D)
- Color: Black
- Material: SPCC steel, ABS plastic, tempered glass
- Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
- 3x 120mm (front)
- 2x 120mm (lid)
- 1x 120mm (back)
- 2x 120mm (power supply cover)
- Fan pre installed:
- 1x 120mm RGB fan (rear)
Radiator mounts:
- 1x max. 120 mm (back)
- Dust filter: Bottom (removable)
Drive bays:
- 2x 3.5 inch or 2x 2.5 inch (HDD cage)
- Power supply: 1x standard ATX up to 151 mm length
- Expansion slots: 7
I/O panel:
- 2 x USB 2.0
- 1x USB 3.0 (Type A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 1x HD audio (3.5mm)
- 1x microphone connection (3.5 mm)
- Maximum graphics card length: 307 mm
- Maximum CPU cooler height: 155mm
Scope of supply:
- 1x Aerocool Delta-G-BK-v1 Midi Tower - black
- 1x 120mm RGB fan (pre-installed)