The MO-RA3 is the uncompromising successor of the successful MO-RA series second The cooling performance was improved even further over the already potent successor. The numbers speak for themselves, over 36m of copper tube and 3.0 square meters of fins are used to make a MO-RA3. The coolant flows parallelly four times through 80 channels. The fins of the MO-RA3 were specially optimized for use of slow-spinning fans. The gigantic surface area of the radiator and efficient geometry guarantee extreme cooling performance.
The design of the quadruple parallel channels Ensures a very low flow resistance Despite the huge cooling surface. Additional versatility is thus provided by the now flow-optimized connection block with three G1 / 4 "threads.

The MO-RA Core LC is shipped without a casing, this version is perfect for DIY users and hence can be operated passively or with fans. For mounting on a case or for the self-made radiator grills MO RA3 Core is equipped with 4xM4 threads on both sides.
The MO-RA3 radiator grills can not be mounted on this heat exchanger.

The production of the MO-RA3 is done only in Europe. Development and assemply are done in Germany, a large percentage of the components is therefore made in Germany.

Technical specifications:
Internal material: Copper tubes, aluminum fins
Casing Material: Copper tubes, aluminum fins
Outer dimensions (LxWxH): 470 x 420 x 63mm
Weight: approx. 6000g
Pressure tested: 5 bar
Surface: Black powder coating
Connection threads: 6 x 1 / 4 "

Extent of delivery:
MO-420 1x RA3 Core LC
4x Screw plug G 1 / 4 inch
Spacer 4x M4x20mm
1x Mounting manual