Watercool HEATKILLER NSB-4a []

The HEAT KILLER KILLER HEAT ® ® SW and NSB allow complete cooling a motherboard. Using these products are North and South Bridge, as well as to cool the voltage converters optimal.

The manufacturer provided cooling solutions often have not the necessary power reserves, or working at the thermal limit. By eliminating the CPU fan in the use of water cooling the thermal load of these components is even greater.
Especially on higher-quality motherboards, therefore, should be heat-sensitive components are integrated into the cooling circuit. The added power reserves of the computer is also in the border area stable.

The KILLER HEAT ® software and NSB are modular. By changing the base plate, a conversion to other components is possible. Optional conversion kit allows the continued use of shells on entirely different hardware. To simplify the selection of the right cooler, you should first look into the following compatibility list your motherboard, or an identical model.

Technical data:

    * Material: Electrolytic copper
    * Dimensions (block size): (LxWxH) 59.0 x 15.5 x 14.5 mm
    * Dimensions (small block): (LxWxH) 35.0 x 15.5 x 14.5 mm
    * Total weight: 90g
    * Tested pressure: 5 bar
    * Seal: NBR 70 (max. 120 ° C)
    * Connection: G ¼ in. (DIN ISO 228-1)

Compatibility List

KILLER HEAT SW cooler drawings

HEATKILLER NSB cooler drawings page 1

HEATKILLER NSB cooler drawings Part 2

Note: It was made a visual review of the bottom plate 4a of the NSB. Here, the outer contour is adapted to Bohrungsabmaße are identical with the NSB cooler drawing.