Thermal Grizzly Kryonaut Thermal Paste - 11.1 grams / 3 ml [TG-K-030-R]

The goal is to supply the overclocker scene with high-performance thermal conduction products, which are still a weak point - but the product portfolio can also be used for better and quieter cooling of gaming computers, workstations, mini PCs and many other purposes. In addition to higher clock rates, better thermal conduction products enable quieter cooling and a longer service life for the components to be cooled.

In order to achieve these goals, Thermal Grizzly worked closely with the well-known extreme overclocker Roman "der8auer" Hartung during product development and tested them, developed chemical compositions and analyzed competitors. Now the first product lines have been completed, which also meet the highest demands of the manufacturer and the overclocking community.

The thermal paste, christened Kryonaut, represents the spearhead. As its name suggests, it is ideally suited for low-temperature cooling such as nitrogen or compressor cooling - but it feels just as comfortable between a CPU and an air or water cooler. Aluminum and tin oxide components are embedded in a carrier structure, which optimally compensate for unevenness on the surfaces of the heat source and heat sink and offer outstanding thermal conductivity. In contrast to many competing products, the Kryonaut does not start drying out even at 80 °C.

The Kryonaut thermal paste comes as a 3 ml syringe with two applicators included. With the help of these applicators, a 27 x 27 mm area can be coated with an approximately 3 mm drop of paste, so the syringe is sufficient for around 30 applications - this of course depends on the individual application and skill.

Danger! Please note the manufacturer's warnings before use!

Technical details:
- Quantity: 3ml / 11.1g
- Thermal conductivity: 12.5 W/(m K)
- Density: 3.7 g/cm³
- Viscosity: 120 - 170 Pas
- Operating temperature: -200 to +350 °C