Seagate Enterprise HDD v5, SATA 6G, 7200RPM, 3.5 inch - 6TB [ST6000NM0115]

Product Information - Enterprise HDD v5, SATA 6G, 7200RPM, 3.5 inch - 6TB

Seagate is a true industry size in the hard disk market, where you can barely pass by if you want to stack up a PC system with a lot of memory. The range of models covers all segments - from small (2.5 inch) to large (3.5 inch), from green-IT (at lower speed) to high speed (at 7,200 rpm), from home users To professional environment.

With the Enterprise Series, Seagate is targeting professional users who run applications with very large data volumes. It is no surprise, then, that the enterprise hard disks have a storage capacity of up to 6 terabytes.

This six terabytes of enterprise-class version (6 TB = 6,000 GB) offered by the Enterprise series is designed specifically for continuous operation. High performance is provided by two processors, as well as a "ramp load", a motor attached to the top of the hard drive for optimum performance in all enclosures

The enterprise of Seagate allows the reliable storage of large quantities - even on unstructured data - with great capacity, without compromising performance. According to the manufacturer, the near-line performance of 550 TB per year is ten times higher than for desktop hard disks.

The 3.5-inch HDD is robust and consistently designed and is therefore advertised by Seagate with an enormous mean lifetime (MTBF) of 2 million hours. On the other hand, the HDD is very fast (226 MB / s persistent data throughput) due to 256 MB cache, SATA-6G interface and 7,200 rpm.

Technical details:
Dimensions: 101.85 x 26.1 x 147 mm (W x H x D)
Format: 3.5 inches
Weight: approx. 705 g
Capacity: 6 TB
Speed: 7,200 rpm
Cache: 256 MB
Persistent data transfer rate: 226 MB / s
Average latency: 4.16 ms
Connection: SATA 6G
Power consumption (average / idle): 8.31 / 7.25W
Shock resistance (in operation): 70 G for 2 ms
Operating temperature: 5 - 60 ° C

Note on warranty coverage for OEM hard disks by caseking:
Since some hard disk manufacturers do not offer any or only a limited manufacturing guarantee for OEM goods, we take over the original manufacturing warranty of identical non-OEM versions for end customers in full length in the case of the purchase of an OEM hard disk from each manufacturer. Depending on the model, we thus extend the period of the statutory liability (warranty) corresponding to, for example, 3 or 5 years from the date of purchase. This ensures that caseking customers are not a disadvantage even with OEM goods.