This new "Slip Stream - Kaze-Jyuni" Fan Series presents renowned radiator and fan manufacturers, a new generation 120 mm fan.

The hub of the journal bearings axial fan has been reduced significantly, so that the surface of the rotor blades increases simultaneously. As a result, the flow rate increases depending on the model by up to 40%. Result of this new technology is a relatively higher air flow at the same speed.

The shown variant is characterized by a maximum speed of 1900 rpm and a minimum noise levels. The fan is in a closed standard housing barely audible and is ideal as a quiet case or CPU fan.

Power is supplied via a 3-pin Molex connector, which also supports the reading of the speed. Please note that not every motherboard such low Dreahzahl can read and process control are not.

The scope of supply includes four fan screws and an adapter cable 4 - on 3-pole to the fan directly to the power supply to be connected (through).

Technical details:
Dimensions: 120mm
Depth: 25 mm
Voltage: 12 Volts
Speed​​: 1,900 rpm
Output: about 188 m³ / h
Noise level: about 37 dBa
Lifetime: 30,000 hours
Stock: plain
Connector: 3 Pin Molex

Delivery includes: fan (retail) including mounting screws, 4 to 3 pin adapter cable