Phobya WaCoolT mATX Watercooling Case Black Edition []

The housings are made of 1.5 mm thick steel and therefore extremely durable, which is frequent in the water cooling conversion extremely beneficial. Each of the black powder-coated parts, ie, front & rear, interior, side panels, everything can be removed and remounted. No rivets fastened with M4 screws everything! This allows modders a new dimension of a housing modification.
Case modders will not only have fun in this system. These cases are just the beginning, because all parts can be replaced according to your wishes. It may be a side panel with Plexifenster, the lid should be a different radiator installed, the back should be equipped with 2 power supplies, all of these optional components are available from the manufacturer as soon Phobya commercially.

Individually, the front! Supplied have been omitted on purpose to push buttons or switches. Each two 19mm holes, here in the front lines are laid down. These are optimized for the variety of commercially available switches. Who swears to quality is also suitable probe of Phobya. Of course there'll be too different front options to make this in the future can be as individual as possible.

Water cooling is the issue that was brought in these types of housing in the focus. Sun hose and cable guides are optimized dehingehend. All rubber holes for hoses and cables can be removed to install Fillport there, with classic 19mm Lochbohrgungen. Different radiator, reservoir and pump assembly devices are integrated. This case is the first of its kind in as much detail what vervollkommned on water cooling!

Special features of the Phobya WaCoolT mATX Case Black one case:
Radiator or fan assembly:
Rear: 1x 120mm
Cover: 1x 240mm
-Schlauchdurchführung/Fillport:
2x back, 19mm opening
1x top, 19mm opening
Mounting device pumps:
internally, right side, above the Main Board
M4 threaded holes
Compatibility: e.g. Laing, Laing D5, Eheim 1046 (HPPS, Aqua Stream, Watercool 12V), Eheim 1048, Magicool 12V DC 260 and DC 400 Phobya, EK-DCP DCP 2.2 & 4.0
Expansion tank
internally, right side, above the motherboard or tubes lying in the HDD bay
4x Slotin
-ON/OFF And Reset
left and right in front of the hole size 19mm
Mainboard compatibility:
htpc, mATX (Micro ATX)
Graphics types of length up to 370mm
Stands decouple the housing
4x 5.25 "drive bays with 3 Faceplates
-4x 3.5 "drive bays
-1x power supply slot, length up to 370mm

Technical details:
Material: Steel
Color: black powder coated
Dimensions (L x W x H): 383 x 353 x 223mm
Weight: 9240g

Delivery:
1x Phobya WaCoolT mATX Case Black one!
Mounting hardware
Allen key