Quiet: At less than 25dB even most fans in the system emit more noise. For decoupling and therefore further noise reduction two kits are included with the pump: The first a map for quick and easy mounting on the case floor. The mat is self-adhesive on both sides and therefore reliably fixates the pump. The second possibility for pump installation are two brackets with which the pump can be fixated in the case.
A ceramic-based centrifugal bearing promises quiet operation and a long lifespan.
Compact: With the small outer dimensions (see technical specifications) the pump can be installed in almost any corner of the case, even in Midi- or Mini-towers. The compact dimensions of the pump also make connection to the cooling loop easy as the pump's position can easily be varied.
Powerful: Such a small and quiet pump so far always required compromises regarding the power. Not anymore! 4m of pressure head and 800l/h of flow are the kind of performance that will not be stopped even by cooling loops even with multiple waterblocks.
G1/4" connection: No adaptors, no annoyingly long connectors any more! Simply screw in the desired connector and you are set to go!
12V connector: The first advantage of a 12V connector is that it makes the connection with a 230V cable obsolete and that internal operation is made safe and easy. The other great feature of this pump is the connector: It is not a standard 4-Pin Molex connector, it is a 3-Pin fan connector which powers this pump (Important: Check the requirements and capabilities of the sockets to which you connect the pump). This pump can therefore be operated at a fan connector on a Mainboard or a fan controller. This also allows a speed reduction of the pump: Only 8V are required for starting and operation of the pump which makes it additionally quiet and smooth in operation. The fan connector also offers the advantage of rpm monitoring with a compatible controller.
Technical specifications:
Color: Black
Casing material: Plastic
Outer dimensions: (L x W x H): 75 x 66 x 54mm
Connection thread size: G1/4"
Power connector: 3-Pin
Nominal operating voltage: DC 12V
Starting voltage: DC 8V
Power consumption: 18W
Current draw: 1.8A
Max. pressure head: 4m
Flow rate: 800 l/h
Lifespan: 50.000hrs
Noise emission: below 25 db
Extent of delivery:
1x Pump
Decoupling mat
Decoupling bracket with 2x 4mm holes
The EK-MCP 2.2 Water Pump is the ideal accessory for all enthusiast water cooling systems, and is compatible with the all standard water cooling system setups. The EK-MCP 2.2 will easily integrate with the latest water blocks and can achieve up to 400L / hour with its compact, powerful and low-noise design.
Extremely reliable and ultra-quiet, the EK-DCP pump will work silently to ensure your cooling system operates at its peak and makes the most for your hardware overclocking potential.
Details:• Model: EK-DCP 4.0
• Rated voltage: DC12V +/-10%
• Starting voltage: DC 8V above
• Power Consumption: 18W +/-10%
• Load current: 1.8A +/-10%
• Q-max: 800 L/hr +/-10%
• H-max.: 4.0m +/-10%
• Size: 75 x 54 x 66mm
• life Expectancy: 50000/hrs at 25°
• Noise: 24.5 dB
Enclosed:1 × EK-DCP Pump
1 x Anti-vibration Pad
1 x 3pin to 4pin Cord
2x Brackets
Compatibility:
• 1/4" BSPP (G1/4") Threads for ultimate compatibility
Please use the following PDF files for more information on this product.