 |
SKU: 31073 Warranty: 12 months |
Overview
Phobyas 2-component thermal adhesive holds the "bomb" and works like a thermal paste!
The operational area of a thermally conductive adhesive is versatile, but in the main he is determined to hold parts together and connect. Here was the thing the attention of the adhesive after curing is not only determined but also by the case of sudden loads such as Shear forces usually remain cooler used in their place.
So that the adhesive will harden not already in the tube that delivered in the various components just prior to application be mixed. This is a ratio of 4, black liquid to a yellowish transparent liquid. The contents of the tubes has been measured, that if you drained them both, they are exactly the ratio of 4 to 1!
Besides all these technical refinements here and practical things were considered: If only a part of the content needed, both tubes are the lockable lid prevent dehydration. To create a very thin film between heat source and radiator, are designed to coat spatula included. Majority? Of course, one need not use the first for another clean spatula used with difficulty.
Strong hold with heat transfer, that is the 2-component thermal adhesive from the house Phobya!
Technical data:
4g black liquid
1g yellowish transparent liquid
Mixing ratio:
4 (black) to 1 (yellow-transparent)
Thermal conductivity: 0.9 W / mK
electrically non-conductive
Surface curing at 25 ° C: 2h
Holistic curing at 25 ° C: 5-7 days
Freezing Point: 34 ° C
Schmelztemeratur: 152 ° C
ROHS conform
Delivery:
2-component thermal adhesive
2x filler
