In the radiator already 2 1 / 4 inch thread are integrated, allowing the removal of all standard taps.

Important: Please wash before using it again. lessee in all M3 screw in a screw thread once for testing. In rare cases it may be that a little paint is in the thread. If not fit the M3 screws, can also self-tapping screws.
Please Note: Excessive tightening of the screws can damage the radiator. Make sure that the screws do not damage the fins of the radiator. Damage due to improper use are not covered by the warranty.

Note: The Magicool radiators have been revised and are now all available in black. Please note when ordering this item, you may still may get an old version (with aluminum panel).

Technical data:
Material: Copper fins, brass chambers
Dimensions: (L x W x H): 273x121x30mm
Connections: G1 / 4 "
Weight: about 680g
Assembly: 8x M3 thread at the top (for 2x 120mm fan), 8x M3 thread at the bottom (for 2x120mm fan)
Pressure Tested: 8 Bar,
Connection: 2x G 1 / 4 inch
Hole spacing: 6 inches

Attention: The screws can be long depending on the application, screw up enough that damage to the blades excluded.

Warranty: On tightness and processing for 2 years!

Note: For further screwing of the screws can damage the radiator! Please note the correct length. Not all of the screws supplied are appropriate.

Note: Please rinse before mounting the radiator once complete, so Fertigunungs and storage-related residues are not placed in their circulation.