MCubed FanAmp [0]

The FanAmp can be used to supply a fan or even a pump, as it has to extraordinary power output, with different voltages. The FanAmp is supplied via a 4 pin Molex plug. On the other side of the two 3 pin plugs FanAmp are integrated to allow connection of a fan or pump on the one and connection to the motherboard via the other one if desired. Additionally of connection, it's included, temperature sensor is possible. This Allows automatic fan speed adjustment according to the temperature. The control curve can be adjusted using two dials on the PCB, the one on Which voltage sets the fan should run in standard operation (between 0.8 and 11.8 V), the other one sets the temperature above the fan or pump Which should run at 12V.

The fan can then be installed between the motherboard connector and the fan. This operation mode is perfect to expand the voltage range given by the onboard fan controller. Most onboard fan controllers allow a voltage range of eg 12-7V when operated via Speedfan. The FanAmp is perfect to expand that range up to 0.8 to 11.8 V.

Extent of delivery:
FanAmp
3pin Molex extension
Sensor cable
Screwdriver
Velcro pad for installation