EK Water Blocks EK-XTOP D5 PWM - Acetal incl. Pump [3831109840788]

The EK-D5 XTOP PWM is a prefabricated cover made of acetal and already equipped with an EK-D5-PWM pump. The cover in conjunction with the D5 pump will allow up to 15% more hydraulic power than a Laing D5 loudly manufacturers. On three G1 / 4 ports can connect as good as any watercooling connection with G1 / 4 port.

The built-in pump is ideal for watercooling systems. The D5 pump is equipped with an electronic motor ball. This is held in the pump through a special ball bearings ultrarobustem ceramics. The pump achieves a maximum flow rate of 1,500 L / h and a head of 3.9 m.

Power is supplied via 4 pin Molex. In addition, the pump using an adapter to a PWM connector can be connected. The PWM control of the pump thereby enables automatic regulation of the speed. Shall be granted full power when needed or a silent operation in standby mode.

Technical details:

     Material: POM / Acetal
     Head: about 3.9 m
     Maximum flow rate: 1.500 L / h
     Maximum system temperature: 60 °
     Operating voltage: 12 V
     Power Consumption: 23 Watts
     connections:
     4-pin Molex (power supply)
     4-pin PWM adapter
     Ports: 3x G1 / 4-inch
     compatibility:
     D5 compatible reservoirs of EK Water Blocks