Cougar Panzer Midi Tower - black Window [385GML0.0001]

The Cougar Panzer Midi Tower at a glance:

Black Midi-Tower with military design
Support for CEB-Mainboards and smaller
Two large tinted genuine glass side windows
Toolless opening sides
A pre-installed fan; 8 slots available
Plenty of room for water cooling
4x 2.5 inch and 2x 3.5 / 2.5 inch slots
I / O panel with 2x USB 3.0, 2x USB 2.0 & HD audio
Military design with noble hard-glass components

The Cougar Panzer-Midi-Tower has a visual look at the design of the Cougar Panzer MAX and complements the military appearance with two tool-free removable side windows made of tinted hard glass. Due to the martial bearers on the edges of the case as well as the large mesh surfaces in armored chain optics, the complete housing looks like a safe fortress, decorated with noble glass components. The two side windows made of tinted hard glass provide a unique insight into the installed hardware and, above all, in combination with an optional LED lighting, enable a correspondingly impressive presentation. The I / O panel, which is equipped with two USB 3.0 ports, two USB 2.0 ports, HD audio connectors and a Power & Reset button, is located above the large mesh front.
Air and water cooling in the Cougar Tank

A powerful gaming system also wants to be cooled well, which is why the Cougar Panzer with countless cooling possibilities. Up to eight fans or four radiators can be installed inside the housing, which means that there is enough resources for the most powerful gaming hardware. A 120mm fan, which is already pre-installed on the rear, provides the basic supply for good airflow. Further optional 120 mm or 140 mm fans can be installed in the front, lid and floor if required. Alternatively, radiators for cooling water, which can be up to 360 mm long, can also be installed. In order to prevent the valuable components from being lost in the dust, Cougar equips the tank with a total of two dust filters located at the front and the bottom.

Lots of space for hardware

The black interior of the PanzerMIDIO-Tower offers plenty of space for gaming hardware. The motherboard is compatible with the Mini-ITX, Micro ATX, ATX or CEB formats, and can simultaneously accommodate CPU coolers with a height of up to 160 mm as well as up to three graphics cards with a length of 425 mm, This length being reduced to 400 mm as soon as fans are installed in the front. A power supply cover also provides a tidy optic that separates the power supply from the rest of the hardware. On this cover are two 2.5-inch slots, each of which is supplemented by two additional 2.5-inch and 3.5-inch slots on the back of the mainboard tray.

Technical details:
Dimensions: 208 x 565 x 520 mm (W x H x D)
Material: steel, plastic, genuine glass
Color: Black
Form Factor: Mini-ITX, Micro-ATX, ATX, CEB
Total fan possible:
3x 120 mm or 2x 140 mm (front)
3x 120 mm or 2x 140 mm (cover)
1x 120 mm (rear side)
1x 120 mm (ground)
Pre-installed:
1x 120 mm (rear side)
Radiator mountings (dispensing with fan slots):
1x 120/140/240/280/360 mm (front)
1x 120/140/240/280/360 mm (cover)
1x 120 mm (rear side)
1x 120 mm (ground)
Dust filter: front / floor
Drive Shafts:
4x 2,5 inch
2x 3.5-inch (also usable for 2.5 inches)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 3.0
2x USB 2.0
1x each audio in / out
Power-On / Off-Switch
Reset button
Maximum graphics card length: 425 mm (400 mm with front-air fans)
Maximum CPU cooler height: 160 mm