BitsPower Z-Multi Ultra 250mm Water Tank (POM version) [WAAU-431] from WatercoolingUK

Overview

Balancing tanks provide a storage depot for water cooling to compensate for the natural shrinkage of the cooling liquid, for example in the form of diffusion through the hoses, and to prevent air bubbles in the circuit, which in turn could lead to an increased operating noise of the pump.

0/5 | 0 Reviews | Write your Review

Stock, Shipping & Collection Options

Out Of Stock

FREE UK/EU DELIVERY over £500+

Collection is currently unavailable

SKU: WAAU-431

MPN: BP-WTZMU250P-CLBK

EAN: 4719552225408

Warranty: 12 Months

This product is currently out of stock or EOL, please contact us for an ETA.

Check your hardware compatibility here

Details

In addition to these purely practical aspects, balancing containers can also provide visual highlights. Acrylic tubes are particularly suited for this purpose because they offer various modding possibilities with their transparent optics (lighting, colored liquids, etc.). In addition, they are flexibly placeable and are offered in various sizes.

This is a model of Bitspower with two screw-in POM caps. These are sealed with two rubber rings opposite the acrylic tube. This is comparable thick and thus particularly stable. The upper cover of the normally vertical expansion tank has a single G1 / 4-inch thread with an aqua pipe, which provides an optical extension of the tubing leading from the outside to the GTC.

The lower POM cover, on the other hand, has four G1 / 4-inch threads. One of these openings is connected to an internal flow pipe. This is used as an inlet when the inlet and outlet are both guided from the underside to the compensating tank. If, on the other hand, the inlet is from the upper side, one of the other openings should be used as drain, since air is sucked in at a water level below the height of the flow pipe. A so-called Vortex-Killer with Bitspower-Logo sitting on the lower cover also reliably prevents the formation of swirls and compensates for possibly developing vacuum.

The scope of supply includes three sealing plugs, which can be used to seal the openings that are not required. Furthermore, two mounting rings are provided which are simply pushed over the tube and compressed at the desired location. Thanks to the straight outer side and the corresponding holes, they can be flexibly tightened. The screws required for the installation are also included in the delivery.

Note: Connections or fittings are not included in the scope of delivery and must be purchased separately.

Technical details:

    Dimensions: 302 x 60 mm (length x diameter)
    Material: Acrylic (tube), POM (cover / floor)
    Thread: 5x G1 / 4 inch
    Delivery:
    1x expansion tank
    1x general assembly set
    1x Aqua-Pipe G1 / 4-inch
    1x Z-Cap cover
    3x closure plug (silver nickel-plated)

BitsPower Z-Multi Ultra 250mm Water Tank (POM version) [BP-WTZMU250P-CLBK]

Overview

Stock, Shipping & Collection Options

Details

Related

Customer Reviews

Write your own Product Review

Your Review

Your Rating