Aquacomputer poweradjust 3 USB, standard version [53166]

Overview

The poweradjust 3 is an autonomous single-channel fan / pump control, the kann.Das be also used as aquabus extension for a aquaero 5 or 6 aquaero poweradjust 3 is primarily for the control of Laing DDC and D5 pump and powerful fans optimized, but also other consumers with up to 30 watts continuous power (up to 36 watts with optional passive cooler) at 12 volts can be operated on the controller. Thus a poweradjust 3 is in the Ultra version for example for temperature-controlled regulation of nine airstream fans to a airplex evo 1080 radiator.

0/5 | 0 Reviews | Write your Review

Stock, Shipping & Collection Options

10+ Available Delivery in 3-5 Days

FREE UK/EU DELIVERY over £500+

10+ Available for Collection

SKU: WAZU-540

MPN: 53166

EAN: 4260073417945

Warranty: 12 Months

£37.56 inc VAT

Check your hardware compatibility here

Details

The peak output power can reach up to 54 watts, providing reserves for the significantly higher starting currents, which can cause pump or fan. A configurable launch Boost ensures that z. Example, a pump has enough time to start up before it is decelerated. Of course, this function uses also, if that is recognized on the speedometer or flow sensor signal a stoppage of fan or pump (configurable).

The poweradjust 3 offers all also the predecessor poweradjust two existing connections. In detail these are a power output with speed signal evaluation, USB interface to the PC, a temperature sensor input, a flow sensor input, a speed signal output and a aquabus interface for connection to a aquaero 5 or aquaero 6.Wesentlicher difference to the poweradjust 2 is the poweradjust 3 in switching controller technology exported output stage, which is much more efficient and produces less waste heat.

This standard version is identical except for the temperature control function for Ultra version. The latter can use the external temperature sensor and for regulating the power. Who does not need this function, accesses to the standard version.

Like its predecessor, is also the poweradjust 3 equipped with a two-stage overload protection function that only sets in at high temperatures, the power to 100 percent and in further increasing temperature the output disabled to prevent damage to the board. Various alarm settings in terms of temperature, flow and speed signal give you more options on hand to protect your system from potential damage.

Technical Details:
connections:

1x power output with speed signal evaluation

1x USB interface to PC

1x temperature sensor input

1x Flow sensor input

1x RPM signal output

1x aquabus interface for connection to aquaero 5.6

Endurance:

30 W continuous power

36 W with optional passive cooler

54 W briefly

compatibility: