Aqua Computer Aqualis XT 880ml with fill level sensor and lighting option, G1 / 4 [34050]

The return line is connected to the central terminal of Aqualis, the water flows through the central tube to the cover and brass occurs there through eight openings, which is particularly in conjunction with lighting an eyecatcher. A thin plexiglass plate near the bottom of the air decreases Aqualis entry into the circulation to a minimum. Alternatively, the return to a side port to be connected, the water then flows back out of the ground in the surge tank. For this configuration, a baffle plate is, in turn, ensures the adequate venting of the circuit.
 

The Aqualis PRO versions additionally features a built-in floor Plexiglas window and provides space for the installation of up to six LEDs (type 5 mm, not included) and is prewired for additional retrofitting of level measurement.
 

The Aqualis XT versions also have an in ground integrated plexiglass window and provides space for the installation of up to six LEDs (type 5 mm, not included) and is also equipped with an electronic level measurement with USB and aquabus interface, a configurable alarm output and an external temperature sensor input provided. For monitoring and configuring the software is available for download aquasuite. The four-pole aquabus interface also allows direct connection to a aquaero 5 controller (not included). The alarm output can be optionally configured as an artificial speed signal output for connection to a fan with speed signal analysis (eg the motherboard) or contact output, for example, to switch a LED on alarm. For alarm monitoring, in addition to the measured level are also the external temperature sensor input. The external temperature sensor input is compatible with all services offered by Aqua Computer temperature sensors.
 

All 450 ml variants are optionally available with a nano coating that causes water to simply roll off of the inside of the glass tube.
 

Dimensions without stainless steel bracket: 80 x 80 x 300 mm

Filling volume: about 880 ml

Connection thread: G1 / 4
 

A surge tank with mounted pressure equalization membrane covers

A stainless steel bracket

An internal USB cable

A baffle plate made of stainless steel

A plugs G1 / 4 (pre)

Fasteners
 

Please note: The reservoir is shipped without fittings, please order separately.