AeroCool DS 230 Midi-Tower - black [ EN58331]

The features of the Aerocool DS 230 mid-tower:

Modern-discreet design
Adjustable LED lighting
Pre-installed sound insulation
Space for 41cm long graphics cards
Max. 360 mm radiator in the front
Max. 280 mm radiator in the lid
Fancontroller for up to seven fan
Aerocool DS 230 Midi-Tower: "Dead Silence" & LED Lighting

The DS 230 has a front with the look of brushed aluminum, at their upper and lower ends a respective LED Strip is skilful accents. More color LED lights can be found at the base, the leaves 230 are like on a pedestal the DS. The LED lighting can be adjusted in seven different colors, and in addition to the ability to disable the LEDs, a "Breath" mode can be selected.

As housing Aero Cools DS series of DS230 with a factory-installed sound insulation in the front, the lid and the side panels is provided. This penetrating barely disturbing noises from inside the Towers by outwardly. The integrated PWM fan hub can be regulated to up to seven fan, so that the noise emissions can be kept to a minimum here.
Silent housing for water-cooled gaming hardware: the Aerocool DS 230 Midi-Tower

Since Aerocool waived the DS 230 to an optical drive and moved the drive cage for two SSDs / HDDs on the floor in front of the power supply unit, in the interior of mid-tower remains a lot of space for hardware. So can be installed up to 41 cm long graphics cards if no fans are mounted in the front. When installing a fan or a fan / radiator combination, the maximum installation length for graphics cards is correspondingly reduced.

To the components will also be able to tame as quietly as possible through water cooling, the DS provides 230 room for a 360 mm radiator in the front. Another up to 280 mm large radiator can be mounted in the lid. In this case, an insulating board over the Meshgitter the cover must be removed to allow the heat exchanger to operate effectively.

For data storage, the DS has 230 mid-tower next to the drive cage below the power supply cover another bay for a 2.5-inch drive behind the motherboard tray to. Two other SSDs can be installed right next to / in front of the motherboard. For cable management numerous cable penetrations in the MB tray are available.

Technical details:
Dimensions: 230 x 475 x 477.8 mm (W x H x D)
Weight: approx 8.2 kg
Material: steel (0.7 mm), plastic
Color: Black
Form Factor: Mini-ITX, Micro-ATX, ATX
Fan total possible:
3x 120 mm or 2x 140 mm (front)
1x 120 mm (rear)
2x 140/120 mm (cover)
Of preinstalled:
1x 120mm (rear, PWM)
Radiator Mountings (partial waiving fan slots):
1x max. 280/360 mm (front)
1x max. 120 mm (rear)
1x max. 280/240 mm (lid)
Drive Bays:
2x 2.5 / 3.5 inch (internal, HDD cage)
3x 2.5 inch (internal)
PSU 1x standard ATX (optional)
Expansion Slots: 7
I / O panel:
2x USB 3.0 (internal connection)
2x USB 2.0
1x per Audio In / Out
fan control
LED Control
Maximum video card length: 388 mm (with front fan)
Maximum video card length: 413 mm (without front fan)
Maximum CPU cooler height: 170 mm
Maximum PSU-length: 180 mm