13mm (1/2) Fitting G1/4 With O-Ring Knurled - Silver Nickel Plated [0]

Specially designed for high-flow system, with replaceable G1 / 4 "thread. Compatible with hoses with an inner diameter of 13mm.


Technical details:
Thread size: 1/4Zoll
Height: 26mm
Diameter: 16mm

Note for watercooling beginners:
The connectors for hoses (7 / 16 ", 3 / 8 ", 1 / 2 ") are provided with measurements in mm in our shop. These can differ by +-1mm, Which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp chosen, a larger fitting should be. With some fittings that tend to be larger, though it is possible that a hose with an inner diameter of 13mm actually does seal without a hose clamp.

Overview:
10mm (3 / 8 ") hose clamp: up to 8mm none, from 10mm up required
10mm (7 / 16 ") hose clamp: up to 8mm none, from 10mm up required
12mm (1 / 2 ") hose clamp: 11mm up to none, from 12mm up required
13mm (1 / 2 ") hose clamp: 11mm up to none, from 13mm up required

Extent of delivery:
Barbed Fittings
Hose clamp