lian li UNI FAN SL140 RGB PWM Fan, Pack of 2 incl. Controller - 140mm, white [UF-SL140-2W]

Thanks to the daisy-chain system, only one cable is required to connect up to four fans. In addition, the UNI FAN SL140 fans have addressable RGB LED lighting and strong performance values. Of course, the fans are even better in this practical double pack with UNI HUB controller.

The features of the Lian Li UNI FAN SL140 in a double pack at a glance:
- Two 140mm PWM fans in white
- Unique plug-in system: fans are connected via pin contacts
- 32 digitally addressable RGB LEDs per fan
- Speed and lighting controllable by software
- 1,500 rpm speed at 30 dB(A)
- 119.7 m³/h airflow & max. 1.67 mmH2O air pressure
- Rubber decoupler for vibration reduction
- With UNI HUB controller

The Lian Li UNI FAN SL140 Double Pack in detail
The Lian Li UNI FAN SL140 convinces with a clever and unique concept: The fans have pin contacts and are connected to a practical plug-in system. Several fans no longer have to be connected individually - this saves a lot of time and prevents cable clutter .

The fluid dynamic ball bearing ensures a high level of smoothness and life expectancy. Due to the reduced friction losses, higher speeds are achieved with the same energy consumption than with conventional fans. The effective speed is a maximum of 1,500 rpm. With up to 30 dB(A) under full load, the UNI FAN SL140 fans are also very quiet and offer very good performance values with 119.7 m³/h airflow and 1.67 mmH2O static pressure at full speed.

Each fan contains 32 digitally addressable RGB LEDs, 16 each in the front and back. A UNI HUB RGB and fan controller is included in the scope of delivery, which enables convenient control of the fans and their lighting via software.

Specifications:
Dimensions (per fan): 140 x 140 x 25 mm (W x H x D)
Material: Plastic, aluminium
Colour: White
Fan:
Connection: proprietary (UNI HUB required)
Bearing: Fluid dynamic ball bearing
Speed: 1,500 rpm
Volume: max. 30 dB(A)
Flow volume: max. 119.7 m³/h
Static pressure: max. 1.67 mmH2O
Operating voltage: 12V
Starting voltage: 6V
Current: 0.10A
Power consumption: 3.6 W
Connections UNI HUB:
1x SATA power
1x USB 2.0 (internal)
1x 4-pin PWM for the fan signal
4x fan ports (2x cables each)
1x 3-pin RGB (5VDG, 5V)
Lighting:
Type: digitally addressable RGB
Number: 32 LEDs per fan
Connection: proprietary (UNI HUB required)
Current: 0.34A

Includes:
2 x Lian Li UNI FAN SL140 RGB PWM fans
1 x Lian Li RGB Fan Controller