lian li UNI FAN SL140 RGB PWM Fan - 140mm, black [UF-SL140-1B]

Thanks to the daisy-chain system, only one cable is required to connect up to four fans. In addition, the UNI FAN SL140 fans have addressable RGB LED lighting and strong performance values.

The features of the Lian Li UNI FAN SL140 at a glance:
- 140mm PWM fan in black
- Unique plug-in system: fans are connected via pin contacts
- 32 digitally addressable RGB LEDs per fan
- Without RGB and fan controllers
- 1,500 rpm speed at 30 dB(A)
- 119.7 m³/h airflow & max. 1.67 mmH2O air pressure
- Rubber decoupler for vibration reduction

The features of the Lian Li UNI FAN SL140 in detail
The Lian Li UNI FAN SL140 convinces with a clever and unique concept: The fans have pin contacts and are connected to a practical plug-in system. Several fans no longer have to be connected individually - this saves a lot of time and prevents cable clutter .

The fluid dynamic ball bearing ensures a high level of smoothness and life expectancy. Due to the reduced friction losses, higher speeds are achieved with the same energy consumption than with conventional fans. The effective speed is a maximum of 1,500 rpm. With up to 30 dB(A) under full load, the UNI FAN SL140 fans are also very quiet and offer very good performance values with 119.7 m³/h airflow and 1.67 mmH2O static pressure at full speed.

Each fan contains 32 digitally addressable RGB LEDs, 16 each in the front and back. The fan can be connected to the optionally available UNI HUB controller and then controlled via it with L-Connect or the motherboard software. The controller is included in the double pack sets of the SL140 UNI FAN fans.

Note: To control and configure the fan and RGB LED lighting, an existing system with a Lian Li UNI HUB controller is required. The fan offered here serves as an extension for the corresponding 2-pack, which includes this controller. The controller is not available separately. (Product no.: LULI-016/LULI-017).

Specifications:
Dimensions (per fan): 140 x 140 x 25 mm (W x H x D)
Material: plastic, aluminum
Color: Black
Fan:
Connection: proprietary (UNI HUB required)
Bearing: Fluid dynamic ball bearing
Speed: 1,500 rpm
Volume: max. 30 dB(A)
Flow volume: max. 119.7 m³/h
Static pressure: max. 1.67 mmH2O
Operating voltage: 12V
Starting voltage: 6V
Current: 0.10A
Power consumption: 3.6 W
Lighting:
Type: digitally addressable RGB
Number: 32 LEDs per fan
Connection: proprietary (UNI HUB required)
Current: 0.34A