kolink Observatory Y Mesh ARGB Midi Tower - black [OBSERVATORY Y MESH]

- Midi tower with four integrated Umbra 120 mm aRGB PWM fans
- Mesh front with innovative ventilation from the side
- All black interior
- Vertical installation of the graphics card possible*
- Space for additional fans
- Generous space for radiators of up to 360 mm
- Includes Umbra aRGB controller
- *Riser cable sold separately.

Observatory Y Mesh: Familiar case with new features
The Kolink Observatory Y Mesh aRGB from the Observatory series is a premium enclosure with innovative features aimed specifically at RGB lovers and water cooling enthusiasts. Four Kolink Umbra PWM-aRGB 120 mm fans are pre-installed on the front and back to increase the airflow and at the same time set color accents. The front panel is made of air-permeable mesh. The spacious interior is easily accessible thanks to the removable side panels and offers enough space for your high-end hardware.

The Observatory Y Mesh aRGB Midi Tower is equipped with a variety of new upgrades and improvements. The premium housing offers a wide range of practical and innovative features and also allows versatile possibilities for future adaptations. The clever interior design and the integrated aRGB fans also make the case the perfect choice for hardware enthusiasts and RGB lovers.

Elegant tempered glass meets solid steel
By using high-quality materials, the Kolink Observatory Y aRGB provides good grip and stability for all installed hardware. The frame and cladding are made of 0.7 mm thick SPCC steel and provide a robust structure for the housing. A hinged side panel made of tempered glass provides insight into the inner workings of your precious computer.

The Kolink Observatory Y aRGB has four pre-installed Kolink Umbra PWM-aRGB 120 mm fans. Three of them are attached to the front, the last one to the back. Since they are PWM fans, their speed adapts to the workload - with intensive workloads, higher speeds are used, while when not needed, they require fewer revolutions for quieter operation. This supports the airflow provided by the ventilation and mesh cover.

Alternatively, there are many ways to install fans and radiators throughout the case, making the Kolink Observatory Y aRGB ideal for custom water cooling. The front panel accommodates three 120mm or 140mm fans. Alternatively, the panel can accommodate 240 mm, 280 mm and 360 mm radiators. On the top there is space for three 120 mm fans, two 140 mm fans or a radiator up to 360 mm in size. The back can accommodate a single 120mm or 140mm fan or radiator, while the power supply case cover has brackets for two 120mm fans. Thanks to the spacious interior, there is also space for a CPU cooler with a height of up to 175 mm.

Outstanding hardware support
With its specially designed interior, the Observatory Y aRGB offers incredible flexibility when it comes to the hardware to be installed. The motherboard tray can accommodate all motherboard form factors, including E-ATX, and supports seven expansion slots. This chassis is compatible with the Kolink Vertical GPU Kit, which allows vertical mounting of graphics cards. With headroom for cards up to 380mm long, this chassis can accommodate most triple-slot GPUs currently available. In the lower part of the case, the special power supply cover with a removable plate provides easier access. Under the cover there is space for an ATX power supply up to 190 mm in length and a drive cage for two 3.5-inch drives. In addition, on the back of the motherboard tray there are mounts for three 2.5-inch SSDs - a really extensive and flexible support for your storage solution.

Top airflow thanks to four aRGB fans
The black interior of the Observatory Y provides the perfect stage for your RGB lighting, your impressive hardware or your sleeved cables. A hidden area for cable management behind the motherboard tray also ensures a tidy interior. This area is equipped with three Velcro strips and offers 30mm of space to properly route cables and guide them directly to the motherboard. The I/O panel is located directly above this area, including ports for 2x USB 3.0 Type A, 2x USB 2.0 and HD audio

The four pre-installed Umbra aRGB fans not only impress with excellent cooling, but also offer a great light show with their aRGB lighting. The aRGB lighting can be customized with the Umbra aRGB controller and downloadable software. Alternatively, the aRGB lighting can be set via compatible software when connected to a 3-pin 5V aRGB header of the motherboard.

Specifications:
- Dimensions 231mm x 488mm x 471mm (W x H x L)
- Weight: approx. 6.6kg
- Material: steel, tempered glass, ABS plastic
- Color: black
- Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
- Front: 3x 120mm or 2x 140mm
- Cover: 3x 120mm or 2x 140mm
- Back: 1x 120mm or 1x 140mm
Fan pre installed:
- 3x 120 mm Umbra aRGB PWM fan (front)
- 1x 120 mm Umbra aRGB PWM fan (rear)
- Radiator mounts (partial absence of HDD and/or fan slots):
- Front: 1 x 240mm / 280mm / 360mm radiator
- Top: 1 x 240mm/280mm/360mm radiator
- Dust filter: Lid (removable)
Drive bays:
- 3x 3.5 inch or 3x 2.5 inch (HDD cage)
- 2x 2.5 inch (back motherboard tray)
- Power supply: 1x standard ATX up to 190 mm length (optional)
- Expansion slots: 7
I/O panel:
- 2x USB 3.1 (Type A, USB 3.2 Gen 2, max. 10 Gbit/s)
- 1 x USB 2.0
- Each 1x Audio In/Out
- Maximum graphics card length: 380 mm
- Maximum CPU cooler height: 175mm
Scope of supply:
- 1x Kolink Observatory Y Mesh aRGB Midi Tower
- 4x 120mm fans (pre-installed)
- 1x screw box