anidees AI PI Raspberry Pi 2 Housing - black [AI-PI-BB-plus]

In summer of 2014 was followed by the Model B + a revised version of Raspberry Pi, where there is also a space-saving microSD slot and an extended GPIO header with 40 pins in addition to two additional USB ports. In addition, the connection configuration has been optimized to also introduced in 2015, significantly faster Raspberry Pi 2 familiar. Thanks to the well otherwise identical PCB layouts, both models fit conveniently in the same housing.

Simple elegance combined with the highest quality of workmanship has always been a hallmark of anidees and so it can also this unique case for the Raspberry Pi 2 (Model B) or the model B + of the first version of its wealth of features and premium design, all to provide competitive products to shame. The CNC machined aluminum unibody enclosure provides the smallest single board not only necessary protection, but adds on top of that a dignified appearance. Thus anidees aimed at those customers who want even with a do-it-yourself computer for crafting great importance to an attractive appearance.

The sophistication, has acted with the anidees in the development, shows that the designers have done intensely familiar with the Raspberry Pi. The Raspi-2 housing is made entirely of a hardened aluminum alloy in black velvet pleasantly roughened surface. So the board is reliably protected against damage and in addition serves the 1.5 to 4 mm thick material as a practical heat sink. Even hobbyists have considered the engineers in the development and incorporated appropriate openings for the ribbon cable of the GPIO ports, the camera connection or for DSI interface of Raspberry Pi board.

Due to the extremely low heat emissions of the Broadcom chips on the Raspberry Pi motherboard pocket computer can be passively cooled and completely silent. Due to its cooling effect and the air vents at the housing floor, the aluminum case of anidees especially for overclocking that within certain limits even without warranty loss are possible at Raspberry Pi is. The black tinted top cover consists of a 5 mm thick acrylic plate and enables crystal clear insight to the interior. The noble premium housing gives the mini-computers for a total of a unique aura of quality and elegance.

The assembly of the ingenious mini computer is very simple: the Raspberry Pi 2 itself is simply inserted from the top into the AI-PI housing and then fixed with four screws. A little highlight this ultimate design housing for the Raspi 2 is the included Micro-USB cable with extremely practical on / off switch. The decoupling rubber feet on the ground come from German production, are UV-resistant and ensure a secure fit. In the box located next to all necessary screws and suitable tool (Allen key) for convenient mounting.

Technical Details:

    Dimensions: 67 x 36 x 91 mm (W x H x D)
    Material: Aluminum (Body), acrylic (cover)
    Weight: approx 157 g
    Color: Black (Housing), Black-Transparent (cover)
    Compatibility:
    Raspberry Pi - Model A +, 256MB Raspberry Pi - Model B +, 512MB
    Raspberry Pi 2 - Model B, 1 GB
    I / O ports:
    1x CSI camera module (ribbon-opening)
    1x DSI display connection (ribbon-opening)
    1x GPIO (40-pin) (ribbon-opening)
    1x LAN (RJ-45)
    4x USB 2.0
    1x Micro USB (Power)
    1x composite video / audio output (3.5mm jack, 4-pin)
    1x HDMI
    Special features:
    Openings for ribbon cable, 40-pin GPIO
    Micro-USB power cable with On / Off Switch
    Compatible with Raspberry Pi Model A +, B + and Raspberry Pi 2