Zalman T4 Micro-ATX Case USB 3.0 - black [ZM-T4]

In comparison, the small but mighty housing division moves usually something in the background. Wrongly, because even in this segment Zalman shines with a visually striking appearance and high functionality. After the larger models of the midi and full-tower segment of the manufacturers now completes the custom palette with the T- housings from also in the mini-tower .

The T4 is like its predecessors, T1 , T2 and T3 also a true Tower , just only in a scaled down version . It is decorated overall somewhat inconspicuous and white with a beautiful front design, to please a mesh insert in the side part and its continuous black color scheme . Note the mounting options for fans. A small gaming cars with excellent cooling is therefore nothing in the way .

The I / O panel is located on the lid and houses two USB ports, one of which is in Standard 3.0 , audio ports and power and reset button . Behind the front , a 120mm fan to be installed , a replaceable dust filter is already at the mounting location . Through the ventilation openings in the lower part of the front , hard drives to be cooled simultaneously . On the side panel, even two 120 mm fans so affixed. A 92- mm fan has already been installed in the back, which ensures that heated air is transported out of the Case Zalman .

The interior is fortunately like the Tower held to be completely in black. This is modern and visually a real gem . But even with installation options and features not sparing the Zalman ZM - T4. Thus, a 2.5 -inch drive can be connected to a tray on the right side are installed vertically , to behind the front two additional 3.5 he drives , as well as in vertical orientation . Above is the possibility to install a 5.25 -inch drive , a matching bezel has the T4 already . Furthermore, can be below the external 5.25 slots and bottom , respectively , a 2.5 -inch drive install . In addition to micro-ATX boards and boards can be used in the Mini- ITX form factor , power supplies can handle the T4 in the ATX standard. These four expansion cards , including graphics cards with a length of 250 mm can be installed.

Other features like a good cable management, Waterpipe - holes , pre-installed dust filters , vibration effective insulation rubber or abegerundeten edges inside the case make this cabinet a price -performance hit .

Technical details :

    - Dimensions: 189 x 427.5 x 364 mm (W x H x D)
    - Material: Steel
    - Color: Black
    - Form Factor: Micro -ATX , Mini -ITX
    fan:
    - 1x 120 mm ( front optional)
    - 1x 92 mm (rear panel, pre-installed)
    - 2x 120 mm ( sidewall optional)
    - Filters: front, side , bottom
    drives:
    - 1x 5.25 inch ( external)
    - 2x 3.5 inch ( internal)
    - 3x 2.5 inch ( internal)
    - Power supply (optional ) : Standard ATX
   -  Expansion Slots : 4
    I / O Panel:
    - 1x USB 3.0
    - 1x USB 2.0
    - 1x each Audio In / Out
    - Maximum graphics card length : 300 mm (without HDD cage or fan)
    -  Maximum graphics card length : 250 mm (without extensions )