Zalman S4 Plus Midi-Tower - black [S4 Plus]

A particularly elegantly designed front with large mesh and the two pre-installed 120 mm fans with RGB lighting behind it ensure optimal airflow in the housing. There are removable dust filters on the lid and on the underside. Last but not least, the power supply cover ensures a tidy interior, in which there is plenty of hardware.

The Zalman S4 Plus Midi Tower at a glance:
- Elegant and distinctive design with a large tinted side part made of acrylic glass
- Front panel with large mesh for optimal airflow
- Three pre-installed 120 mm fans with RGB lighting
- Well-equipped I / O panel with 2x USB 2.0 & 1x 3.0 & audio in / out
- Two SSD / HDD combo slots, 1x SSD slot
- Removable dust filter & cable management
- Graphics cards up to 315 mm in length & CPU coolers up to 160 mm in height
- Space for up to one 240 mm radiator or two 120 mm radiators

The features of the Zalman S4 Plus case in detail
The attractive exterior of the Zalman S4 Plus is completed by clever detail solutions on the inside. The housing has a power supply cover for a clean look and enough space for cable management behind the mainboard tray. There is space for up to two 3.5-inch hard drives or one 2.5-inch SSD in an HDD cage behind the power supply. Another SSD can be installed on the back of the mainboard tray.

A power supply that can be a maximum of 180 millimeters long can be accommodated under the power supply cover. There are a total of six recesses for cable management. These can be used, for example, to lay cables for the three 120 mm fans that can be installed on the front. Two 120 millimeter fans with RGB lighting have already been built there. Another 120 fan, also with RGB lighting, is pre-installed on the back of the case. Two additional 120 mm fans can be attached to the cover. Instead of the fans, a 240 mm radiator can be attached to the front and a smaller 120 mm fan on the back. There are removable dust filters on the bottom and on the lid. The stylish front has a large mesh for optimal airflow.

The I / O panel, equipped with a USB 3.0 port and two USB 2.0 ports, is located on the front of the lid. Several up to 315 mm long graphics cards can be accommodated in this elegant housing, provided there is no fan or radiator on the front, and make the Z4 Plus the optimal basis for a well-equipped gaming system. It also has a large recess in the mainboard tray for the use of large CPU coolers in combination with a backplate to enable a particularly stable assembly of the processor cooler, which can be up to 160 millimeters high.

Technical details:
- Dimensions: 206 x 458 x 400 mm (W x H x D)
- Material: steel, plastic, acrylic glass
- -Weight: approx.3.7 kg
- Color: black, gray
- Form factor: ATX, Micro-ATX, Mini-ITX
Total fans possible:
- 3x 120 mm (front)
- 2x 120 mm (lid)
- 1x 120 mm (back)
Pre-installed:
- 2x 120 mm (front)
- 1x 120 mm (back)
Radiator mountings:
- 1x max. 240 mm (front)
- 1x max. 120 mm (back)
- Dust filter (removable): bottom, lid
Drives:
- 2x 3.5 / 2.5 inches (internal)
- 1x 2.5 inch (internal)
- Power supply (optional): standard ATX
- Expansion slots: 7
I / O panel:
- 1x USB 3.0
- 2x USB 2.0
- 1x per audio in / out
- Maximum graphics card length: 315 mm (without front fan)
- Maximum power supply length: 180 mm
- Maximum CPU cooler height: 160 mm