Zalman S3 TG Midi-Tower - black [S3 TG]

A noble front with the look of brushed aluminum and the 120 mm fans that can be installed behind it ensure optimal airflow in the housing. There are removable dust filters on the lid and on the bottom. Last but not least, the power supply cover ensures a tidy interior with plenty of hardware space.

The Zalman S3 TG Midi-Tower at a glance:
Elegant design with a large tempered glass side panel
Three 120 mm fans pre-installed
Well-equipped I / O panel with 2x USB 2.0 & 1x 3.0 & audio in / out
Up to two SSDs / HDDs or a maximum of four SSDs each
Removable dust filter & cable management & front panel with side ventilation slots
Graphics cards up to 330 mm in length & CPU coolers up to 156 mm in height
Space for up to one 240 mm radiator or two 120 mm radiators

The features of the Zalman S3 TG case in detail
The attractive exterior of the Zalman S3 TG is completed by clever details inside. For a clean look, the housing has a power supply cover and enough space for cable management behind the mainboard tray. Up to two 3.5-inch hard drives or two 2.5-inch SSDs, which can be mounted without tools, find a home in an HDD cage behind the power supply unit. Two more SSDs can be attached to the rear of the mainboard tray.

A power supply unit that can be a maximum of 180 millimeters long can be accommodated under the power supply cover. There are a total of six cutouts for cable management. Cables for up to three front-mounted 120 millimeter fans can be laid through these. Two fans in the front and one fan on the back of the case are preinstalled. Two additional 120 mm fans can be attached to the lid and top of the power supply cover. Instead of the fan, a 240-millimeter radiator can be attached to the front and a smaller 120-millimeter fan to the rear. There are removable dust filters on the bottom and on the lid. The stylish front with the look of brushed aluminum has large side air slots to optimize the airflow.

The lavishly equipped I / O panel with a USB 3.0 port and two USB 2.0 ports is located on the front of the lid. Several graphics cards up to 330 mm long can be accommodated in this elegant housing and make the Z3 the ideal basis for a well-equipped gaming system. It also has a large recess in the mainboard tray for the use of large CPU coolers in combination with a backplate to enable particularly stable installation of the processor cooler, which can be up to 156 millimeters high.

Technical details:
- Dimensions: 196 x 462 x 424 mm (W x H x D)
- Material: steel, plastic, tempered glass
- Weight: approx. 4.8 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 mm (front)
- 2x 120 mm (cover)
- 2x 120 mm (top of power supply cover)
- 1x 120 mm (rear)
- Of which pre-installed:
- 2x 120 mm (front)
- 1x 120 mm (rear)
- Radiator mountings:
- 1x max. 240 mm (front)
- 1x max. 120 mm (rear)
- Dust filter (removable): front, bottom
- Drives:
- 2x 3.5 / 2.5 inch (internal)
- 2x 2.5 inches (internal)
- Power supply (optional): Standard ATX
- Expansion slots: 7
- I / O panel:
- 1x USB 3.0
- 2x USB 2.0
- 1x per audio in / out
- Maximum graphics card length: 330 mm
- Maximum length of the network part: 180 mm
- Maximum height of the CPU cooler: 156 mm