Zalman S2 Midi-Tower - black [CA-099-ZA]

A noble grid-look front with dust filter and the 120 mm fans pre-installed behind it ensure optimum airflow in the housing. There are further removable dust filters on the lid and on the bottom. Not least the power supply cover ensures a tidy interior, in which plenty of hardware space.

The Zalman S2 Midi Tower at a glance:
- Attractive design with large tinted side panel made of acrylic glass
- Three 120mm fans pre-installed
- Well equipped I / O panel with 2x USB 2.0 & 1x 3.0 & audio in / out
- Up to two SSDs / HDDs or a maximum of four SSDs
- Removable dust filter & cable management & air permeable front panel
- Graphics cards up to 330 mm in length & CPU cooler up to 156 mm in height
- Room for up to a 240mm radiator or two 120mm radiators

The features of the Zalman S2 housing in detail
The attractive exterior of the Zalman S2 is completed by clever detail solutions inside. The case for a clean look has a power supply cover and enough space for cable management behind the motherboard tray. Up to two 3.5-inch hard drives or two 2.5-inch SSDs, which can be mounted without tools, find a home in an HDD cage behind the power supply. Two more SSDs can be attached to the back of the mainboard tray.

Under the power supply cover can accommodate a power supply, which may be a maximum of 180 millimeters long. There are a total of six slots for cable management. These cables can be laid for the total of three front-installable 120-millimeter fan. Two has already settled Zalman. A third one is preinstalled on the back of the case. Two more 120mm fans can be attached to the lid and top of the power supply cover. Instead of the fans can be mounted on the front of a 240-millimeter radiator and on the back of a smaller 120-millimeter fan. There are removable dust filters on the bottom and on the lid, while the stylish mesh front with mesh look is also equipped with a dust filter.

The lush I / O panel, equipped with a USB 3.0 port and two USB 2.0 ports, is located on the front of the lid. Several up to 330 mm long graphics cards can be accommodated in this noble case and make the Z2 the optimal basis for a well-equipped gaming system. It also has a large recess in the mainboard tray for using large CPU coolers in combination with a backplate to allow for a particularly stable mounting of the processor cooler, which can be up to 156 millimeters high.

Technical details:
- Dimensions: 189 x 451 x 412 mm (WxHxD)
- Material: steel, plastic, acrylic glass
- Weight: about 4 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total fan possible:
- 3x 120 mm (front)
- 2x 120 mm (cover)
- 2x 120 mm (top of power supply cover)
- 1x 120 mm (back)
Preinstalled:
- 2x 120 mm (front)
- 1x 120 mm (back)
Radiator Mountings:
- 1x max. 240 mm (front)
- 1x max. 120 mm (back)
- Dust filter (removable): front, bottom, front
drives:
- 2x 3.5 / 2.5 inches (internal)
- 2x 2.5 inches (internal)
- Power supply (optional): Standard ATX
- Expansion Slots: 7
I / O panel:
- 1x USB 3.0
- 2x USB 2.0
- 1x each audio in / out
- Maximum graphics card length: 330 mm
- Maximum network part length: 180 mm
- Maximum height CPU cooler: 156 mm