Zalman R1 Midi-Tower - White [R1 WHITE]

The white casing is designed down to the front door in rectilinear shapes. In the rear area of ​​the side part is a window made of acrylic, which releases the views of the also black interior. Bottom right is a white-R1 logo that perfectly complements the Zalman logo on the front.

The front is decorated with a metal brush front door, which forms a contrast to the otherwise very linear shapes of the housing and is additionally insulated on its back. The I / O panel located on the front side of the lid and is home to a USB 3.0 port and two USB 2.0 ports, two audio jacks, the power switch and a reset button.

When you open the front door, behind two covers for the 5.25-inch drives and a visor for an external 3.5-inch drive hide. Among turn there is a long range of designed vents behind which hides a dust filter and two 120-mm fan slots. In addition, there is the above-mentioned fan control, with the two fans simultaneously at three different levels ("High", "Low", "Stop") can be regulated.

A 120-fan with blue LEDs there is already pre-installed. Also at the back of a 120-mm fan is pre-installed and another in the lid. The lid also integrates yet another 120-mm fan. Instead of the fan can be there also install a 240-dual-radiator.

The cover case has a removable panel that sits directly on the two fan slots. This has the sense to give the fans and the casing has a larger airflow. Also, to improve airflow, the area under the power supply has a large ventilation opening with an integrated dust filter.

Inside, we find there enough space for hardware components. Motherboards fit into the form factors ATX, Micro-ATX and Mini-ITX in the R1. Besides the mentioned external drives, can be in the HDD cage four 3.5-inch hard disk drives installed. It also can be also almost all of the drives installed without tools. Only on the cage can be a 2.5-inch screw large drive. In the back are seven expansion slots to find.

Otherwise it is possible that, up to 200 mm long power supply and up to 160 mm high CPU cooler installed. Graphics cards can be installed with a length of up to 360 mm in Zalman R1. Conveniently located in the scope of supply also a graphic support, so that the card does not bend after a long time under the pressure of its own weight.

The same bracket can instead use for attaching a fan. The fan on the angle can be freely aligned, and blowing a specific component directly. The size of the fan plays only with respect to the remaining space in the interior with built-in components and a role can be virtually varied freely.

Technical details:

    Dimensions: 192 x 465 x 450 mm (W x H x D)
    Material: Steel (Body), Plastic (front cover)
    Weight: approx 4.8 kg
    Color white
    Form Factor: ATX, Micro-ATX, Mini-ITX
    Fan total possible:
    2x 120 mm (front)
    2x 120 mm (rear)
    1x 120 mm (cover)
    Of this pre-installed:
    1x 120 mm (front, blue LED)
    1x 120 mm (rear)
    1x 120 mm (cover)
    Radiator-Mountings (partial waiving fan slots):
    1x max. 240 mm (lid)
    Filters: front, bottom, PSU (removable)
    Drive Bays:
    2x 5.25 inches (external, without tools)
    1x 3.5 inch (external; without tools)
    4x 3.5 inch (internal; without tools)
    1x 2.5 inch (internal)
    Power Supply: 1x standard ATX (optional)
    Extension slots: 7
    I / O Panel:
    1x USB 3.0 (internal connection)
    2x USB 2.0 (internal connection)
    1x per Audio In / Out
    Fan control: 2 channels
    Maximum video card length: 360 mm
    Maximum power supply Length: 200 mm
    Maximum CPU cooler height: 160 mm