Zalman K1 Midi-Tower - black [K1]

A noble front flap with the brushed aluminum look is adorned with RGB LED strips that give the stylish case extra shine. The lavishly equipped I / O panel controls the lighting. The lighting is complemented by a pre-installed RGB LED fan on the back. Not least, the power supply cover ensures a tidy interior, in which plenty of hardware space.

The Zalman K1 Midi Tower at a glance:
- Attractive design with a large tinted side panel made of tempered glass
- Stylish front in the look of brushed aluminum with RGB LED strips
- Well equipped I / O panel with 2x USB 2.0 & 2x 3.0 & RGB LED control
 Up to two SSDs / HDDs or a total of four SSDs
- -Removable dust filter & cable management & air permeable front panel
- Graphics cards up to 380 mm in length & CPU cooler up to 178 mm in height
- Room for radiators up to 360 mm at the front and 240 mm at the lid

The features of the Zalman K1 housing in detail
The attractive exterior of the Zalman K1 is complemented by clever details inside. The case for a clean look has a power supply cover and enough space for cable management behind the motherboard tray. Up to two 3.5-inch hard drives or two 2.5-inch SSDs, which can be mounted without tools, find a home in an HDD cage behind the power supply. Two additional SSDs can be attached to the back left of the motherboard tray.

Under the power supply cover can accommodate a power supply, which may be a maximum of 190 millimeters long. There are a total of six slots for cable management. These cables can be laid for the total of three front-installable 120-millimeter or two 140-millimeter fan. A 120-millimeter fan with RGB LED lighting is pre-installed on the back of the case. It can be replaced by a 140-millimeter fan.

Lots of room for radiators
Two 120-mm or 140-millimeter fans can be attached to the lid and two more 120-mm fans can be attached to the top of the power supply cover. Instead of the fans, a 280 mm or 240 mm radiator can be mounted on the front and a 240 mm radiator on the lid. There are removable dust filters on the bottom and lid. The stylish brushed aluminum look has large side air vents to optimize airflow.

The lush I / O panel with two USB 3.0 or two USB 2.0 ports is located on the front of the lid. There is also a switch that controls the lighting of the RGB LED strips integrated in the front panel. Several up to 360 mm long graphics cards can be accommodated in this noble case and make the K1 the optimal basis for a well-equipped gaming system. It also has a large recess in the mainboard tray to use large CPU coolers in combination with a backplate to allow for a particularly stable mounting of the processor cooler, which may be up to 178 millimeters high.

Technical details:
- Dimensions: 210 x 458 x 450 mm (WxHxD)
- Material: steel, plastic, tempered glass
- Weight: approx. 6.4 kg
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total possible fan:
 3x 120 mm / 2x 140 mm (front)
- -2x 120 mm / 2x 140 mm (cover)
 2x 120 mm (top of power supply cover)
- -1x 120 mm / 1x 140 mm (back)
Preinstalled:
- 1x 120 mm (back)
Radiator Mountings:
- 1x max. 280/360 mm (front)
- 1x max. 240 mm (lid)
- Dust filter (removable): front, bottom
drives:
- 2x 3.5 / 2.5 inches (internal)
- 2x 2.5 inches (internal)
- Power supply (optional): Standard ATX
- Expansion Slots: 7
I / O Panel:
- 2x USB 3.0
- 2x USB 2.0
- 1x RGB LED control
- 1x each audio in / out
- Maximum graphics card length: 380 mm
- Maximum network part length: 178 mm
- Maximum height CPU cooler: 190 mm