Watercool Heatkiller RAD, 280 mm, S - stainless steel [24128]

- All-copper structure with stainless steel frame and brass antechambers
- Up to 4 x 140mm fans (push-pull)
- All water-conducting parts made entirely of copper
- Extremely high flexibility in accommodation
- 2x G1/4 inch thread

Radiators from Watercool for the best cooling results
Copper radiator from Watercool for two 140 mm fans in single-sided operation or up to four 140 mm fans in push/pull configuration. The Heatkiller RAD from Watercool is only 30 millimeters high and is made almost entirely of copper. All water-conducting parts are therefore particularly thermally conductive. The radiator is surrounded by a steel frame, which ensures an elegant look.

Very good cooling thanks to copper and fin arrangement
The Heatkiller RAD is made almost entirely of copper. Only the antechambers are made of brass. Two inlets and outlets with the universal G1/4 inch thread standard are integrated into these.

The fin spacing was chosen to achieve optimal cooling even with low fan speeds and without high static pressure. This makes it possible to create a system that is both quiet and cool at the same time. M3 screws for mounting fans and the radiator are included. Protective plates under the threads prevent the screws from being overtightened and thus damaging the fins.

Technical details
- Dimensions: 320 x 140 x 30 mm (W x H x D)
- Material: copper (fins, channels), brass (pre-chambers), steel (frame)
- silver
- Weight: 870g
- Connections: 2x G1/4 inch
- Fan Compatibility:
- 2x 140 mm (single-sided)
- 4x 140 mm (push/pull)
- Fan thread: M3
- Scope of delivery:
- 1x Watercool Heatkiller RAD
- 1x accessories

Note: Please only use in conjunction with clear, transparent water cooling fluids. The particles and additives in Pastel fluids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in the manufacturer’s warranty also being voided.