Water Heatkiller IV Basic Intel - Acrylic Clean [18006]

The biggest revision compared with their predecessors learned the Heatkiller IV the cooling structure. Thanks to sophisticated micro fins the cooling medium is now a much larger contact surface to the cooler available, at which the heat transfer takes place. But the flow behavior has been further optimized. Compared to its predecessor, the cooling capacity could be increased again by as much as 3 degrees Celsius by these improvements.
Also, the flow benefits from the optimization measures, especially Watercool has integrated large volume exported collecting ducts during Heatkiller IV. The copper bottom, transparent acrylic lid and stainless steel fittings and visually very attractively designed water cooler has an impressive high-flow design, which also makes him the perfect partner for less powerful pumps.
The new cooling structure of the Water Heatkiller IV, which is offered here in the lower mid-range version "Basic", comes incidentally entirely without nozzle plate. The waiver increases the passive fail-safety of the cooler, as can accumulate less debris in the cooling structure in this concept. Even with the equipment a lot has changed.
So the Heatkiller has IV Basic as well as Pro now has a comfortable Easy-mount system. After initial installation, the CPU cooler can at any time without tools on Intel motherboards with the bases in 2011 (V3), 115X or 1366 disassemble or assemble. But not even necessary to remove the motherboard. The restraint system is assumed to reflect the pressing forces. Incorrect installation is thus practically almost impossible.
Friends larger connection systems will be pleased with the increased distance between the two G1 / 4-inch connection threads, which now amounts to 25 mm. Thus the Heatkiller IV Basic for Intel is compatible with all popular connection types, through to 19/13 and 16/10 mm OD / ID. The production of Heatkiller IV takes place in an ultra-modern CNC machines in the German offices from Watercool.
This product is delivered without the necessary connections and without thermal compound. These are therefore sold separately. For Intel motherboard with sockets LGA1150, 1155 or 1156 Watercool offers an additional, optional to be acquired Stainless steel backplate to (WACP-249 in Dealer-range), which improves the fit and stability of Heatkiller IV.

Specifications:
- Dimensions (cooler): 59 x 17 x 66 mm (W x H x D)
- Material: Copper (base), Acrylic (lid), polished stainless steel (brackets)
- Seal: NBR 70
- Connectors: 2x G1 / 4 thread
- Distance: 25 mm
Socket compatibility:
- Intel 1150, 1155, 1156, 1366, 2011 2011 V3
Scope of supply:
- Water Heatkiller IV Water Block
- Mounting material
- Installation Instructions