• Basket

    My Basket


    Your basket is currently loading..

  • Forums
  • Contact Us
  • New Products
  • See what Customers say!

    See what Customers say!

  • Collect from Manchester

    Collect from Manchester

  • Monthly Finance Available

    Monthly Finance Available

  • Free UK/EU Delivery on £500+

    Free EU Delivery on £500+

COVID-19 (Coronavirus)   |   We are open for Online Orders   |   More Info
COVID-19   |   We are open for Online Orders   |   More

Vector Custom Design VBC01 Benchtable / Showcase - black [VBCRMVP02]

Vector Custom Design VBC01 Benchtable / Showcase - black
Vector Custom Design VBC01 Benchtable / Showcase - black
Vector Custom Design VBC01 Benchtable / Showcase - black
Vector Custom Design VBC01 Benchtable / Showcase - black

0/5 | 0 Reviews | Write your Review* Currency conversions are based on live rates. All orders are billed in GBP
The VBC01 of Vector Custom Design is more than just a simple Benchtable. It fulfills all requirements of a Benchtable, but thanks to the cover of acrylic glass can be used as a showcase. On the VBC01 motherboards can be installed up to E-ATX form factor. Power supply, optical drives and data storage are mounted under the motherboard tray. The drives are hidden behind a flap with the Vector logo and the fan and radiator support is extreme!
 Out Of Stock
  FREE UK/EU DELIVERY over £500+

Buy Now, Spread the Cost

This product is currently out of stock or EOL, please contact us for an ETA.

EAN: 0000000000000
Warranty: 12 Months


The features of the Vector Custom Design VBC01 Benchtable at a glance:
    Acrylic glass lid with fan slots
    Mountings for 240 radiators in the sides
    360 mm radiator slot in the back
    Front flap with Vector logo
    Double-sided holes for the I / O panel
    Maximum of eleven 120-mm fan slots
    Two removable mounts for 5.25-inch drives
    Brackets for three data storage

Vector Custom Design VCB01: Benchtable meets Showcase
Highlight of VBC01 Benchtables is the cover made of acrylic glass, which allows the use of small VBC01 as "Showcase". Since the sites are also closed and is used to access the Benchtable a large front door, use as a Showcase is even more obvious. So who wants to present its hardware proud finds a stylish presentation platform in VBC01.

The mainboard is easily mounted on the tapered Benchtable of Vector Custom Design. The power supply is mounted on its side under the motherboard, on the floor of the housing. The power cord for power supply and video card (s) can be routed through cable guides in the tray.

Benchtable / Showcase for Custom Water Cooling
Since up to two 240mm radiators and a single 360s heat exchanger in the lower part of the housing can be mounted, the cable entries are also needed for laying hoses. For attaching Terms and pumps the VBC01 two brackets are included. As with a PC case with two chambers and the Vector-Benchtable the components that generate a lot of heat, housed separately from the other components.

The modular design of the lower part makes some planning to organize the system necessary. Case-experienced modders offer at VBC01 extensive possibilities for designing a very individual Showcase. For installation of optical drives two brackets are available that can be mounted in the front area. Two other brackets are for installation of either three HDDs or SSDs three.

The "front" panel can be mounted either on the left or right side in the page footer. The Vector logo in the front flap is deposited with a slightly milky acrylic glass plate which can be skilfully illuminated by the proper use of LEDs. The removable lid can record on both sides of two additional 120 mm fan and are fastened on the Benchtable / Showcase when needed.

Note: It is supplied as a handy flat pack and must be assembled itself! All required components are included!

Technical details:
    Dimensions: 500 x 420 x 370 (with lid, no 230) mm (W x H x D)
    Material: Steel (Case), acrylic glass (cover)
    Weight: about 10 kg (with cover, without about 8 kg)
    Color: Black
    Form Factor: XL-ATX, ATX, Micro-ATX, Mini-ITX
    Fan total possible:
    2x 120 mm (left, in the cover)
    2x 120 mm (right, in the cover)
    2x 120 mm (left)
    2x 120 mm (right)
    3x 120 mm (rear)
    Radiator Mountings:
    1x max. 240 mm (left)
    1x max. 240 mm (right)
    1x max. 360 mm (rear)
    Filter: No
    Drive Bays:
    2x 5.25 inches (removable)
    3x 3.5 or 3x 2.5 inch (removable)
    Power Supply: Standard ATX (optional)
    Expansion Slots: 8
    I / O panel:
    2x USB 3.0 (left and right side)
    1x per Audio In / Out (Left and right side)


Customer Reviews

We have no reviews for this product yet

Write your own Product Review

Your Review

Your Rating

Customers also considered

Vector Custom Design VBC01 Benchtable / Showcase - black
Please wait while we process your request...