Thermaltake View 31 Miditower, tempered glass - black [CA-1H8-00M1WN-00]

These enable a graphics card to be installed vertically, ie "on the side". This way, the often impressive cooling design of the pixel accelerators can be displayed. The icing on the cake is the support for custom water cooling, which makes the View 31 a real sight.
The Thermaltake View 31 Midi Tower at a glance:

Tempered glass sides
Front of tinted acrylic glass
Vertical installation of graphics card possible!
Graphics cards up to 420 mm
Space for a 360 mm radiator in front & lid
Easy assembly of pumps & AGBs
Thermaltake View 31: Modular design & high functionality

For the installation of the graphics card, Thermaltake has come up with something special. In addition to eight horizontal PCI slots, the case has two modular vertical PCI bezels. Up to 42cm long graphics cards can be installed either as usual with the GPU cooler down, or vertically, with the graphics card cooler facing the window. This makes the high-end gaming graphics card impressive.

In addition to the impressive design, Thermaltake has also placed great emphasis on the functionality of the View 31. A 360 or 280 mm radiator can be installed in the front and lid, while pumps and reservoirs can be attached to the floor or to the mainboard tray. The floor can also receive a 120 or 140 mm radiator, like the back. The built-in custom water cooling can also be admired by the two sides of Tempered glass.

If you prefer to limit your gaming hardware with a classic air cooling system, you can install a CPU cooler up to a height of 180 mm and install two 200 mm fans in the lid. The front takes three 120 or two 140 fans, while in the bottom and the rear each 120 / 140er fan can be planted. Two preinstalled 140mm Riing fans with blue LED lighting irradiate the hardware ex factory.

Three 2.5- or 3.5-inch data storage devices can be installed either in a drive cage in front of the power supply or behind the mainboard tray, with the SSDs / HDDs being screwed onto the drive slots so that both options are not possible at the same time. The I / O panel on the front panel, in addition to the mandatory audio connectors and power / reset buttons, has two USB 2.0 and 3.0 ports each.

Note: The PCIe riser cable required for a vertical mounting of the graphics card is not included in the scope of delivery and must be ordered separately. The graphics card should not be more than two slots during vertical installation.

Technical details:
Dimensions: 250 x 497 x 511 mm (W x H x D)
Weight: approx. 9.9 kg
Material: steel (SPCC), plastic, hard glass
Color: Black
Form Factor: ATX, Micro-ATX, Mini-ITX
Total fan possible:
3x 120 mm or 2x 140 mm (front)
3x 120/140 mm or 2x 200 mm (cover)
2x 120/140 mm (ground)
1x 120/140 mm (rear side)
Pre-installed:
1x 140 mm (front, Riing LED-Fan (blue))
1x 140 mm (rear, Riing LED fan (blue))
Radiator mountings (if fan slots are not used):
1x max. 360/280 mm (front)
1x max. 360/280 mm (cover)
1x max. 120/140 mm (bottom)
1x max. 120/140 mm (rear side)
Filter: right front, bottom, cover (each removable)
Drive Shafts:
3x 2.5 / 3.5 inch (internal, HDD cage or behind MB tray)
Power supply: 1x standard ATX (optional)
Expansion slots: 8 + 2
I / O panel:
2x USB 3.0
2x USB 2.0
1x each audio in / out
Maximum graphics card length: 420 mm (without HDD cage)
Maximum graphics card length: 278 mm (with HDD cage)
Maximum net distance: 180 mm (With fan in the ground)
Maximum net length: 220 mm (without fan in the ground)
Maximum CPU cooler height: 180 mm