Thermaltake View 28 RGB Midi-Tower - black Window [CA-1H2-00M1WN-00]

The lid and the left side panel are also made of one piece and are reminiscent of the hinged doors of sporty luxury cars thanks to the curved acrylic glass window. Another highlight is the two vertical PCI slots on the back of the tower. These make it possible to install a graphics card "standing on the side". So the often impressive radiator design of the pixel accelerator can be put on display. The icing on the cake is the support for custom water cooling, which makes the View 28 a real eye-catcher.

The Thermaltake View 28 RGB Midi-Tower at a glance:
- Ingenious design with gullwing look
- Optimized airflow and RGB LEDs
- Vertical installation of the graphics card possible!
- Space for a 360mm radiator in the front
- Easy installation of pumps & GTC
- Front with tinted acrylic glass
- Power supply cover for clean system construction

Thermaltake View 28 RGB: Ingenious design & high functionality
In addition to the impressive design, Thermaltake has also put a lot of emphasis on functionality on the View 28. In the front, a 360 mm radiator can be installed. Pumps and Reservoirs / T & Cs can be mounted on the power supply cover or on the motherboard tray while the large window can be viewed for custom water cooling.

For the installation of the graphics card Thermaltake has come up with something special. In addition to eight horizontal PCI slot covers, the case has two vertical PCI panels. Up to a maximum of 41 cm long graphics cards can be installed either as usual with the GPU cooler down, or vertically, with the graphics card cooler facing the window. This makes the high-end gaming graphics card impressive.
Midi-Tower or Showcase? The Thermaltake View 28 is both!
The combination of design and functionality make the View 28 a first-class midi tower. The gullwing design and the vertical mounting of the graphics card also give the case a showcase character. The case is predestined for the installation of a custom water cooling and offers many more features.

The Midi Tower has dust filters in the front and under the power adapter. The power supply and hard drive cage for two 2.5- or 3.5-inch data stores are separated from the other components by a PSU shroud, and up to four additional 2.5-inch SSDs can be mounted behind the motherboard tray ,

For the most part, the front consists of dark-tinted acrylic glass, with a round air intake at the top, which has been recessed into the front and creates interesting lighting effects with RGB LEDs. The front panel I / O panel has two USB 2.0 ports and a USB 3.0 port in addition to the mandatory audio ports and power / reset buttons.

Note: The PCIe riser cable required for vertical mounting of the graphics card is not included and must be ordered separately. The graphics card should not be higher than two slots when installed vertically.

Technical details:
- Dimensions: 200 x 493 x 505 mm (W x H x D)
- Weight: approx. 6.4 kg
- Material: Steel (SPCC), plastic
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total possible fan:
- 3x 120 mm (front)
- 1x 120 mm (back)
Preinstalled:
- 1x 120 mm (rear, 1,000 rpm, 16 dB (A))
Radiator mountings (without fan slots):
- 1x max. 360 mm (front)
- 1x max. 120 mm (back)
- Filter: front, power supply (removable)
Drive Bays:
- 2x 2.5 / 3.5 inches (internal, HDD cage)
- 4x 2.5 inches (internally, behind the MB tray)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 8 + 2
I / O panel:
- 2x USB 3.0
- 1x USB 2.0
- 1x each audio in / out
- Maximum graphics card length: 410 mm (without front fan)
- Maximum network part length: 180 mm
- Maximum CPU cooler height: 155 mm