Thermaltake Level 20 MT ARGB Midi Tower, Tempered Glass - Black [CA-1M7-00M1WN-00]

The pre-installed RGB LED controller can be addressed and synchronized via compatible motherboards from ASUS, Gigabyte, MSI and ASRock. Its front as well as the window side part made of tempered glass allow a view of all hardware components even when closed at any time, which is customizable thanks to numerous design details. Thus the level 20 MT ARGB becomes a real eye-catcher.

The Level 20 MT ARGB Midi Tower at a glance:
- Front and side part made of tempered glass
- Four pre-installed 120mm fans, three of them with RGB LEDs
- Integrated, addressable RGB LED controller
- Graphics cards up to 366 mm in length
- Space for 120, 240 and 360 radiators
- Power Supplies & CPU Coolers up to 170 mm

Level 20 MT ARGB: Smart enclosure with RGB LED controller
Thermaltake gives the Level 20 MT ARGB an addressable RGB LED controller. It supports ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion and ASRock Polychrome RGB. The control of the seven RGB light effects is also possible via a button integrated in the I / O panel. The level 20 MT ARGB has seven horizontal PCI slots. Up to a maximum of 36.6 cm long high-end graphics cards can be installed in the Midi Tower.

Level 20 MT: Ideal for air and water cooling
In addition to the impressive design, Thermaltake has set a high value on functionality at the level 20 MT ARGB. In the front, a 360 mm radiator can be installed. Alternatively, there is space between the front and mainboard for a 240 mm heat exchanger on the mainboard tray. The back can accommodate a 120mm radiator.

If you prefer to tame your gaming hardware with classic air cooling, you can plan a CPU cooler up to a height of 170 millimeters and install a 140 or two 120-millimeter fan in the lid. The front picks up three 120 fans and in the floor as well as in the mainboard tray two 120-mm fans can be scheduled. There is room for another 120 at the back. Four fans are pre-installed at the factory: Three 120 mm fans with addressable RGB LED lighting are located behind the front of the housing and draw air into the interior of the Midi Tower. A simple, black 120 mm fan conveys the waste heat from the components of the tower.

Two 2.5-inch or 3.5-inch data storage devices can be installed in a drive cage behind the power supply cover. A total of three 2.5-inch drives can be installed between motherboard and front fans: two on the motherboard tray and one above the power supply cover. Behind the motherboard tray there are installation possibilities for another 2.5 inch drive. The I / O panel on the front bezel has two USB 3.0 ports in addition to the mandatory audio and power / reset buttons and a button for controlling the RGB LED controller to switch through the lighting effects. Power supplies with a maximum length of 170 mm can be installed behind the cover.

Technical details:
- Dimensions: 204 x 455 x 471 mm (W x H x D)
- Weight: approx. 6.75 kg
- Material: steel, plastic, tempered glass (4 mm)
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
Total fan possible:
- 3x 120 mm (front side)
- 2x 120 mm or 1x 140 mm (cover)
- 2x 120 mm (floor)
- 2x 120 mm (motherboard tray) 1x 120 mm (back)
Preinstalled:
- 3x 120mm (front, 1,000rpm, 27.2dB (A), addressable RGB LEDs)
- 1x 120 mm (back, 1,000 rpm, 26 db (A), black)
Radiator mountings (without fan slots):
- 1x max. 360 mm (front side)
- 1x max. 240 mm (motherboard tray)
- 1x max. 120/140 mm (back)
- Filter: bottom, lid (each removable)
Drive Bays:
- 2x 2.5 / 3.5 inches (internal; HDD cage)
- 2x 2.5 inches (internal, on MB tray)
- 1x 2.5 inches (internally, via PSU-Shroud)
- 1x 2.5 inches (internal, behind MB tray)
- Power supply: 1x standard ATX (optional)
- Expansion Slots: 7
I / O panel:
- 2x USB 3.0
- 1x each audio in / out
- Maximum graphics card length: 366 mm
- Maximum network part length: 170 mm
- Maximum CPU cooler height: 170 mm