Thermaltake Level 20 GT ARGB Black Edition Big-Tower, Tempered Glass - black [CA-1K9-00F1WN-03]

The entire interior is very easy to see through the hinged hinged doors made of tempered glass and the panels in the front and lid. In addition, the housing offers vertical graphics card mounting and extensive mounting options for large radiators as well as pump and expansion tanks for custom water cooling. In the Black Edition, the side strips are in black instead of silver, as in the original Thermaltake Level 20 GT ARGB.

The Thermaltake Level 20 GT ARGB Black Edition Big Tower at a glance:
- Front lid and side parts made of 5 mm thick tempered glass
- Motherboards up to the E-ATX form factor
- Including 2x addressable 200 mm RGB LED fans and 1x 140 mm fan
- Up to 9x 120mm or 7x 140mm fans or 4x 200mm fans
- Space for three 420 mm radiators as well as pump and expansion tanks
- Modular design with vertical graphics card mounting
- I / O panel with 2x USB 3.0 / 2x USB 2.0 and 1x USB 3.0 Type C
- 7x 3.5 "HDD or 10x 2.5" SDD

Hardware options in Thermaltake Level 20 GT ARGB Black Edition:
The case offers a total of eight horizontal PCI slot covers, which can also be aligned completely vertically thanks to the modular design. The graphics card can also be set up with an optionally available riser cable. Through the transparent side window, a high-end gaming graphics card can be staged with maximum effect. The spacious housing accommodates pixel accelerators with a length of 31 - a maximum of 41 centimeters if the HDD cage is not used. Motherboards up to the E-ATX form factor are accommodated on the mainboard tray and a whopping 200 millimeters are available for CPU coolers.

The side parts, front and lid are made of 5 mm tempered glass and thus allow an unobstructed view of the interior of the housing. The side panels are attached to hinges, can be opened by 180 ° or optionally lifted out slightly. Otherwise, the case is completely black. The power supply cover can be removed so that a chic power supply can also be used to its full potential. Two 120 mm fans can also be installed on the underside, in which case the power supply unit can be 220 mm long.

Air and water cooling options:
In addition to the stylish design, Thermaltake has also placed great emphasis on airflow in the Level 20 GT ARGB Big Tower. In addition to the two pre-installed, 200-millimeter, digitally addressable dRGB-LED fans in the front and the 140 fan in the back, far more fans can be installed in the housing. So huge 200-millimeter models are also possible in the lid. Alternatively, three 120 or 140 models can be accommodated in the front and lid, while the housing base can accommodate two 120 mm fans. Thermaltake installs a digitally addressable RGB LED hub in the Level 20 GT ARGB, with which the lighting of the pre-installed fans can be controlled via a button in the I / O panel. It is also possible to connect to a digitally addressable RGB header (5V) on a mainboard with ASUS Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync or ASRock Polychrome.

For complex custom water cooling, the Level 20 GT ARGB offers a variety of mounting locations for radiators, pumps and expansion tanks. 420 or 360 models can be installed in the front and on the mainboard tray. When installed vertically, RGB fans are particularly effective on the radiator. Models up to 360 format can also be accommodated in the lid and representatives up to 240 or 140 millimeters in size can be installed in the bottom and back. A bracket for pumps is included and is installed in the front area of the floor.

Disk and I / O panel
3.5 and 2.5 inch drives can be accommodated in various places in the housing. Two modular cages for two 3.5 or 2.5 inch drives each can be attached to the mainboard tray. Alternatively, data carriers disappear on the back of the mainboard tray, where either up to six 2.5-inch SSDs or three 3.5-inch HDDs can be screwed on. The I / O panel, which is divided on both sides, has the obligatory audio connections and power / reset buttons on the left and two USB 3.0 and USB 2.0 ports on the right. In addition, a modern USB 3.0 connection of type C is provided, which finally makes the annoying turning of the USB plug into the correct position obsolete. And of course three dust filters on the lid, front and bottom should not be missing.

Technical details:
Dimensions: 294 x 580 x 592 mm (W x H x D)
Weight: approx.20.1 kg
Material: steel (SPCC), tempered glass (5 mm), plastic
Color: Black
Form factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Total fans possible:
3x 120 mm / 3x 140 mm / 2x 200 mm (front)
3x 120 mm / 3x 140 mm / 2x 200 mm (cover)
1x 120 mm or 1x 140 mm (rear)
2x 120 mm (bottom)
Pre-installed:
2x 200 mm RGB-LED (dRGB)
1x 140 mm (back)
Radiator mountings (without fan slots):
1x max. 420 mm (front, front of mainboard tray)
1x max. 360 mm (lid)
1x max. 140 mm (back)
1x max. 240 mm (bottom)
Filters: front, bottom, lid (removable)
Drive Bays:
7x 3.5 "or 10x 2.5" (internal; HDD cage or behind the MB tray)
Power supply: 1x standard ATX (optional)
Expansion slots: 8
I / O panel:
1x USB 3.0 Type C
2x USB 3.0 type A
2x USB 2.0
1x audio in / out
Maximum graphics card length: 310 mm (with HDD cage), 410 mm (without HDD cage)
Maximum power supply length: 220 mm (without fan)
Maximum CPU cooler height: 200 mm