Thermaltake Core V21 Micro-ATX Chassis - black [CA-1D5-00S1WN-00]

The black design of the cube is done with a lot of mesh insert, especially in the front. And the two sides is given a mesh insert. The front panel is located in the V21 on the side and offers the power and reset switches, two audio jacks, two USB 3.0 ports.

The cover, however, there is a window which gives the view from the top of the free components. This allows all six panels also easily removed so as to not only share the view of the components in any conceivable way that it is preferable, but also to extend the maximum graphics card length or the motherboard to be mounted horizontally or vertically by the front simply rotated will. The highlight of the cube, however, that he can be stacked to any size. So you can easily define multiple systems as a stack tower.

Here, the Core V21 already comes with a 800 U / min rotating pre-installed 200 mm fan behind the front and can send the user the possibility to install additional fans. Thus, in the back of a 140er- or 120 fan install and install all four 120-mm fan or two optional 140 mm fan in the lid. In addition, two 120mm fans and in both side parts two 140er- each or 120 fan can be installed in the ground.

In addition, the housing instead of fans can also install radiators. Here, a 200 mm radiator can be installed in the rear and a single radiator (120 mm) inthe front. In the two side panels or in the cover either a 280 mm radiator or even two 240mm radiators can be installed. When stacked, the radiator size increased to 540 mm in the front!

On the lower level are beside the power supply and the removable HDD brackets on which you can install three 3.5-inch disks and three 2.5-inch drives. Under the power supply is a removable dust filter. Another filter is located in the detachable front panel.

In the back also holds five expansion slots, so that in the Core V21 also can install multiple dual-slot graphics cards. The maximum length graphics cards is the Core V21 at 350 mm. A CPU cooler may in this case be up to 185 mm high, while the power supply must be 200 mm long.

Technical details:

     Dimensions: 320 x 336 x 424 mm (W x H x D)
     Weight: 6.5 kg
     Material: Steel
     Color: Black
     Form Factor: Micro-ATX, Mini-ITX
     Fan total possible:
     1x 200ml / 140/120 mm (front)
     1x 140/120 mm (rear)
     140 2x / 4x 120 mm (lid)
     2x 120 mm (bottom)
     2x 140/120 mm (left side panel)
     2x 140/120 mm (right side panel)
     Of this pre-installed:
     1x 200 mm (front side; 800 U / min, 13 dB (A))
     Radiator Mountings:
     1x max. 240 mm (front) 1x max. 120 mm (rear)
     1x max. 280 / 2x 240 mm (cover)
     1x max. 280 / 2x 240 mm (side panel)
     Filters: front, bottom (removable part)
     Drive Bays:
     3x 3.5 inch (internal)
     3x 2.5 inch (internal)
     Power supply: 1x Standard ATX (optional)
     Expansion Slots: 5
     I / O Panel:
     2x USB 3.0
     1x per Audio In / Out
     Maximum video card length: 350 mm
     Maximum CPU cooler height: 185 mm
     Maximum power supply Length: 200 mm