Thermal pad 15x15x1.5mm (1 Piece) []

These thermal pads are very useful to compensate height differences  and other Irregularities  on coolers and surfaces that are to be cooled.

Due to the very elastic adaptability and the low hardness of this contact pad only little pressure is needed to allow perfect adaptation to the surfaces to Ensure the best possible heat transfer. With these pads almost any unevenness can be compensated, from microscopically small grooves to visible Irregularities. The self-adhesive surface of these pads allow easy installation and Prevent The pad from shifting during installation of the cooler. These pads can be cut to any desired size and are suitable for just about any Therefore application: From VRAM VRM coolers on graphics cards to blocks on the motherboard. Even large components examined as the North-or South Bridge can be equipped with these pads, as they have excellent heat conductivity.

With their many uses, these thermal pads should be amongst any PC builder's equipment.

Technical data:
Dimensions: 15 x 15 x 1.5 mm
Quantity: 1
maximum bridging gap: 1.5 mm
electrically non-conductive

Delivery:
1x 1.5 mm thermal pad (15x15mm)

Note: This thermal pads up to half their height are pressed together.