Streacom DB4 Fanless Cube Housing - Titanium [ST-DB4T]

The cube case is completely passively cooled. The completely noiseless cooling harmonizes with the stunning design and makes the DB4 appear like a furnishing item in a designer condominium.

The features of the Streaacom DB4 Fanless Cube at a glance:
- Extruded premium aluminum with sandblasted finish in titanium gray
- Completely passive CPU cooling through the outer plates (max 65 W TDP *)
- For mini-ITX motherboards of all sockets (Intel & AMD)
- Up to 5x 3.5-inch and 12x 2.5-inch drives (combinations possible)
- Dual slot expansion cards up to 20 cm length / 11.6 cm height
- Aluminum outdoor panels act as a passive CPU cooler

The monolithic design masterpiece consists of a sturdy benchmark, which is enclosed by four removable outdoor panels made of extruded aluminum with sandblasted surface in titanium gray and a black cover plate made of acrylic. These magnificent aluminum plates not only look awesome, the intelligent shaping also corresponds to a convection surface and thus follows its function as a heat sink for the internally installed processor. The latter is connected to an outside plate for this purpose via a flexibly lockable universal CPU cooler with four copper heat pipes with an outer plate and may have a TDP of at most 65 W (expandable by means of optional Streaacom LH6 heatpipe kit on 110 W).

By removing the lid plate and all four side parts, the mounting of the mini-ITX motherboard is designed very easily on a mounted in the middle and also removable tray. On the back of the tray, either a 3.5-inch HDD, two 2.5 inch SSDS / HDDs, or an optional ODD KIT (Streacom DB4ODD) for optical slimline slot-in drives can be attached. Two PCI blends allow the assembly of dual-slot expansion cards, but allowed to be up to a maximum of 200 mm long and 116 mm. For corresponding graphics cards therefore pay attention to any PCIe power plug. A detailed manual helps with installation and ensures that all components get to the right place.

The CUBES I / O panel has two USB 3.0 ports as well as a Kensington lock and shows - as well as the connections of the mainboard panel - down, but is easily accessible to a corner. For the energy supply of the mini system, Streacom provides the proprietary ZF240 ZF240 Zeroflex Fanless power supply, which is not included and can be found under this link in the CaseKing Shop. Alternatively, the power supply can be done by an optional nanopsu (click here) with external notebook power supply. Other drives can be variably accommodated by means of universal brackets on the frame behind the motherboard tray, so total up to 5x 3.5-inch and 12x 2.5-inch drives are possible.

Technical details:
- Dimensions: 260 x 270 x 260 mm (W x H x D)
- Weight: approx. 7.5 kg
- Material: aluminum (outdoor panels, chassis), acrylic (lid plate)
- Color: titanium (outdoor slabs, chassis), black (lid plate, brackets)
- Form factor: mini-itx (all sockets)
- Total fan possible:
- completely passively cooled
- Drive shafts:
- 5x 3.5 or 12x 2.5 inches (internally, combinations possible)
- (1x 5.25 inch Slimline slot-in optional per ODD kit)
- Power supply: Streacom ZF240 Zeroflex PSU or Nanopsu (not included!)
- Expansion slots: 2
- I / O panel:
- 2x USB 3.0 (internal connection)
- Maximum graphics card length: 200 mm (including power plug!)
- Maximum graphics card height: 116 mm (including power plug!)
Special feature: Integrated CPU cooling with passive heat dissipation (max 65 W TDP, expandable to 110 W TDP via optional StreaCom LH6 Heatpipe Kit)