Singularity Computers Wraith ITX / DTX - black [SC-WRAITH-BK]

The compact housing has an integrated reservoir in the form of a side wall made entirely of acrylic. This also serves as a distroplate and comes with a top and cover for D5 pumps. In addition, two ports for filling and draining the cooling liquid have been incorporated. The black outer panels are made of thick CNC-milled aluminum. Thanks to numerous ventilation openings, they allow efficient heat dissipation. A total of two 240 mm radiators can be installed.

The features of the Singularity Computer Wraith at a glance:
Showcase for Mini-ITX / -DTX mainboards
Integrated distroplate with fill and drain port made of acrylic
Including top and cover for D5 pumps
Side walls made of CNC-milled aluminum
Provides space for two 240 mm large and 30 mm high radiators
Mounting of 13x 2.5-inch and 1x 3.5-inch hard drives possible
Graphics cards up to 300 mm, CPU coolers up to 130 mm
Vertical installation of GPU, ribbon cable included

Singularity Computers Wraith: compact housing for WaKü enthusiasts
With the Wraith, Singularity Computers offers a housing specially designed for water cooling for Mini-ITX and Mini-DTX mainboards. A special highlight is the right side wall made entirely of acrylic, which functions as a distroplate. A reservoir with fill port, a housing for D5 pumps, three outlets and three inlets are embedded in it. In addition, a practical drain port is installed at the lowest point of the cooling circuit, so that the cooling liquid can be drained off easily.

Thanks to the well thought-out layout, the housing effectively requires fewer components for the custom loop, which means that minimalist, elegant custom loops can be implemented. Water cooling was also a priority in the design of the other exterior panels. These are made of CNC-milled aluminum. The 6061 aluminum is also used in the automotive and aviation industries and, in addition to high stability, also has good thermal conductivity. The two 240 mm radiators, which can be installed in the front and in the cover, establish contact with the aluminum and passively dissipate heat to the housing.

Plenty of space for drives and large graphics cards
Graphics cards up to a length of 300 mm and a 2-slot height can be accommodated in the Wraith. They are only installed vertically and can thus be displayed. A suitable riser card including a ribbon cable for connection is already included. For the mass storage, the housing accommodates a total of 13 2.5-inch drives and one 3.5-inch hard drive. CPU coolers can have a maximum height of 130 mm. An SFX or SFX-L power supply unit can be installed for power supply. When using a mini-ITX mainboard, this may be a maximum of 170 mm and in combination with a mini-DTX mainboard a maximum of 100 mm long.

Stylish design and clever features
This variant of the Wraith is completely black. The aluminum outer panels are anodized in matt black. A futuristic rib pattern was worked into this with a CNC milling machine, through which a good supply of fresh air is offered. The robust look is rounded off by the vandalism button for switching the system on and off. The entire acrylic wall can be stylishly illuminated by installing a separately available LED strip. The housing can be assembled from a few individual parts and is assembled without rivets, making it ideal for modding.

The fill port is embedded on the outside at the highest point of the acrylic wall. Therefore, a comfortable filling and pressure testing of the WaKü-Loops is possible. It is just as easy to drain the coolant via the drain port installed on the inside. This is installed at the lowest point of the acrylic wall and does not protrude from the housing. Two sealing plugs are already included in the scope of delivery to close these two ports. The other inlets and outlets are also manufactured in the usual G1 / 4-inch format (BSPP standard).

Caution! The Singularity Computers Wraith is specially prepared for water cooling using a custom loop. Air cooling should not be used in this case. Graphics cards can only be installed vertically and must not exceed a height of 2 slots. Custom WaKü blocks for graphics cards usually do not exceed this height - but it is still recommended to check this when making your selection.

Note: The D5 pump required for using the distroplate is not included in the scope of delivery and can be purchased separately in our online shop.

Technical details:
Dimensions (including feet): 170 x 407 x 407 mm (W x H x D)
Material: anodized aluminum (6061), stainless steel, acrylic
Weight: approx. 7 kg
Color: Black
Form factor: Mini-ITX, Mini-DTX
Radiator mountings:
1x 240 x 30 mm (front, adjustable)
1x 240 x 30 mm (cover, adjustable)
Drive bays:
1x 3.5 inch (internal)
13x 2.5 inches (internal)
Expansion slots: 2 (vertical)
I / O panel:
1x vandalism button (16 mm)
Maximum CPU cooler height: 130 mm
Maximum graphics card length: 300 mm
Maximum graphics card height: 2-slot, vertical
Maximum power supply length:
170 mm with mini-ITX mainboards
100 mm with mini DTX mainboards
Compatibility:
Form factor power supply: SFX, SFX-L
Fittings: G1 / 4 inch (BSPP standard)
Pump type: D5 pump
Scope of delivery:
1x Singularity Computers Wraith case - black
1x reservoir
1x D5 pump head
1x D5 pump cover
1x D5 O-ring 1x fill port
1x drain port (requires valve)
2x sealing plugs
1x internal extension cable for power supply
1x vertical graphics card holder with ribbon cable
1x side wall made of acrylic
1x operating and assembly instructions