Silverstone SST-RL06BR-GP Redline Midi-Tower, TG - black / red [SST-RL06BR-GP]

In addition to comprehensive hardware support, the black midi tower with a stylish design and large, tinted hard glass side window can convince.

The features of the Silverstone SST-RL06BR-GP Redline Midi-Towers

Space for up to 34.8 cm long gaming graphics cards
Up to two 240 mm radiators as well as a 120 mm radiator
Three 120-mm LED front-air fans
Holder for Terms & Conditions
Up to 3x 3.5 "and 2x 2.5" hard drives
2x USB 3.0 and USB 2.0 each
Large hard-glass window in the left side part
SST-RL06BR-GP: Midi tower for custom water cooling

The black interior of the Midi Tower is subdivided into two areas by a power supply cover so that the view through the tinted hard-glass window gives a tidy impression. The front can easily accommodate a 240 or 280 mm radiator, while the lower part of the heat exchanger projects into the area below the PSU shroud when installing a 360 mm radiator. In this case, the three drive bays in front of the power supply may have to be omitted.

A 240-mm radiator can also be installed in the cover so that two large radiators can be accommodated at the same time. However, with the lid radiator, the thickness of the selected model must be taken so that the radiator does not collide with the mainboard. The height of the radiator must not exceed 30 mm.

Compensation containers (AGBs) can be installed directly on the mainboard tray and pumps can be placed in front of the power supply or instead of the drive bays at the bottom of the tower. It is also possible to mount on the mainboard tray, but this would mean that no radiator can be installed in the front.

Design case for overclockers & gamers

The SST-RL06BR-GP Midi-Tower accommodates up to 34.8 cm long graphics cards in the multi-GPU setup, so the use of a custom water cooler is rewarded accordingly. If no custom water cooling is installed, the high-end CPU on the ATX motherboard can be tamed using an AiO solution or a CPU cooler up to 15.8 cm high.

For data storage, two dedicated 2.5-inch installation slots are available, and the drive cage on the ground can accommodate three 2.5-inch or 3.5-inch SSDs / HDDs. The power supply on the floor may be up to 20 cm long.

Three 120 mm fans with red LED light in the front and another 120 fan in the rear ensure a very good airflow in the Midi tower. Two additional 120 or two 140 mm fans can be installed in the lid. The pre-installed 120 fan in the back can be replaced by a radiator if necessary.

Very good Midi-Tower with many features: the SST-RL06BR-GP Redline

Redline makes a name for itself, because the Midi Tower knows how to convince with first-class support for water cooling and hardware. The large hard-glass window provides a glimpse of the hardware illuminated by LED fans.

Visually, the tower with the large, fan-lit mesh area in the front to please. The case sets aggressive accents through the red edge to achieve an impressive look.

The I / O panel on the two audio connectors and four USB ports is located on the right side of the lid, while the Power button on the front is located on the left side of the lid. Removable dust filters are located in front of the front fans and under the power supply.

Technical details:

Dimensions: 200 x 477 x 455 mm (W x H x D)
Weight: approx. 7.17 kg
Material: steel, plastic, hard glass
Color: Black with red border
Form Factor: ATX, Micro-ATX
Total fan possible:
3x 120 mm / 2x 140 mm (front)
2x 120/140 mm (cover)
1x 120 mm (rear side)
Pre-installed:
3x 120 mm (front, red LEDs)
1x 120 mm (rear side)
Radiator mountings (partial waiving of fan slots):
1x max. 120/140/240 mm (front)
1x max. 120/240 mm (cover, max 30 mm high)
1x max. 120 mm (rear side)
Filter: Power supply, front (removable)
Drive Bays:
2x 2.5 inches (internal)
3x 2.5 / 3.5 inch (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 3.0
2x USB 2.0
2x audio
Maximum graphics card length: 34.8 mm
Maximum CPU cooler height: 158 mm
Maximum power supply length: 200 mm