The Silverstone series of the Primera series are first-class Caes, which enable imposing PC configurations. The SST-PM01 Midi-Tower supports two large radiators and has a holder for AGBs. The three pre-installed front air vents are illuminated with LEDs and an LED control in the I / O panel allows the brightness and color modes to be adjusted. In addition to comprehensive hardware support, the matte black mid tower can convince with a stylish design.
The features of the Silverstone SST-PM01WA-W Primera Midi-Towers
Space for up to 41 cm long gaming graphics cards
Up to two 280/360 radiators
Three 140 mm LED front aerators
Holder for terms and conditions
Fan hub for up to 10 fans
Up to 9 SSDs!
2x USB 3.0 and USB 2.0 each
Large window in the left side part
SST-PM01WA-W Primera: Midi tower for custom water cooling systems
The black interior of the Midi Tower is subdivided into two areas by a power supply cover so that the view through the window gives a tidy impression. The front can easily accommodate a 240 or 280 mm radiator, while installing a 360 mm radiator, the lower part of the heat exchanger projects into the area below the PSU shroud. In this case, the three drive bays in front of the power supply may have to be dispensed with.
A 280/360 radiator can also be installed in the lid so that two large radiators can be accommodated at the same time. However, when using two 360 mm radiators, the thickness of the selected models must be taken so as to prevent the heat exchangers from colliding in the upper front area of the tower.
Compensation containers (AGBs) can be installed directly on the mainboard tray and pumps can be placed in front of the power supply or in place of the drive bays at the bottom of the tower. It is also possible to mount on the mainboard tray, but this would mean that no radiator can be installed in the front.
Design case for overclockers & gamers
The SST-PM01BR-W Primera Midi-Tower offers space for up to 41 cm long graphics cards in multi-GPU setup, so the use of a custom water cooler is rewarded accordingly. If no custom water cooling is installed, the high-end CPU on the ATX motherboard can be tamed via an AiO solution or a CPU cooler up to 18 cm high.
For data storage, there are five dedicated 2.5-inch slots, and the drive cage on the bottom can accommodate three 2.5-inch or 3.5-inch SSDs / HDDs. An additional HDD or SSD can be installed directly on the floor in front of the power supply, which can be up to 24 cm long.
Three 140 mm fans with red LED light in the front and another 120 fan in the rear ensure a very good airflow in the Midi tower. Three additional 120 or two 140mm fans can be installed in the lid. The pre-installed 120er fan in the back can be replaced by a 140er fan or a radiator.
Very good Midi-Tower with many features: the SST-PM01 Primera
Primera (Spanish for "first class") takes its name from its name, because the Midi Tower knows how to convince with first-class support for water cooling and hardware. The large window provides a glimpse of the hardware illuminated by LED fans. Via an LED control, the lighting can be adjusted in four stages and the housing fans can be connected to a fan hub.
Visually, the tower knows how to enjoy the large, mesh-lined mesh area in the front, while the top cover is modeled on a spoiler. Around the window and in small inlets on the lid, the case has a discreet red LED lighting, which gives the Primera a touch extravagant.
The I / O panel with the LED control, the two audio ports and four USB ports are located on the right side of the lid, while the Power button is located on the left side of the lid. Removable dust filters are located in front of the front fans and under the power supply.
Dimensions: 220 x 571 x 560 mm (W x H x D)
Weight: approx. 9 kg
Material: steel, plastic
Color: matt black
Form Factor: ATX, Micro-ATX,
Total fan possible:
3x 140/120 mm (front)
2x 140 / 3x 120 mm (cover)
1x 140/120 mm (rear side)
3x 140 mm (front, red LEDs)
1x 140 mm (rear side)
Radiator mountings (partial waiver of HDD and / or fan slots):
1x max. 280/360 mm (front)
1x max. 280/360 mm (cover)
1x max. 140/120 mm (rear side)
Filter: Power supply (removable)
5x 2.5 inches (internal)
4x 2.5 / 3.5 inch (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
1x LED controller
2x USB 3.0
2x USB 2.0
Maximum graphics card length: 419 mm
Maximum CPU cooler height: 180 mm
Maximum power supply length: 240 mm