The three pre-installed front fan are illuminated with LEDs and LED control in the I / O panel allows you to adjust the brightness and color modes. In addition to comprehensive hardware support of black midi tower shines with a stylish design.
The features of the Silverstone SST-PM01WA-W Primera midi towers
Can accommodate up to 41 cm long gaming graphics cards
Up to two radiators 280/360
Three 140 mm LED front fan
Fan Hub for up to 10 fans
Up to 9 SSDs!
The 2x USB 3.0 and USB 2.0
Large windows in the left side panel
SST PM01WA-W Primera: midi tower for Custom Water Cooling
The black-painted interior of the midi tower is divided by a power supply cover into two parts, so that the view through the window gives a streamlined look. The front can easily record a 240- or 280-mm radiator, while the installation of a 360-mm radiator, the lower part of the heat exchanger projects into the region below the PSU Shroud. In this case it may be necessary to dispense with the three drive bays in front of the power supply.
The lid can also be installed a 280 / 360mm radiator, so that two large radiators can be accommodated. However, attention must be paid to the thickness of the selected models in the use of two 360-mm-radiators, so that a collision of the heat exchanger is avoided in the upper front area of the Towers.
Reservoirs (Terms) can be mounted directly on the motherboard tray and pumps can be accommodated before the power supply or in place of the drive bays at the bottom of the tower. Another rig on the motherboard tray is possible, but this would have the consequence that in the front no radiator can be mounted.
Design Case for overclockers and gamers
The SST-PM01BR-W Primera midi tower can accommodate up to 41 cm long graphics cards in multi-GPU setup, so that the use of a custom water cooling will be rewarded accordingly. If no custom water cooling are installed, the high-end CPU can be tamed on the ATX motherboard uses a AiO solution or an up to 18 cm high CPU cooler.
For data storage, there are five dedicated 2.5-inch bays available and the drive cage at the bottom can three 2.5 or 3.5 inch SSDs / HDDs record. Before power supply, which can be up to 24 cm long, another HDD or SSD can be mounted directly on the ground.
Three 140-mm fan with red LED lighting in the front and another 120mm fan in the back make for a very good Airflow in Midi-Tower. Three other 120 or two 140 mm fans can be installed in the lid. The pre-installed 120mm fan in the back can be replaced by a 140mm fan or a radiator if necessary.
Very good mid-tower with many features: the SST-PM01 Primera
Primera (Spanish for "first class") to its name all honor, for the midi tower convinces with first-class support for water cooling systems and hardware. The large window allows a view of the illuminated by LED-fan hardware. Via LED control, the lighting can be adjusted in four stages and the case fan can be connected to a fan hub.
Optically knows the Tower through the large, illuminated by the fan mesh area to please in the front, while the top cover is modeled on a spoiler. To the Window around and in small inlets on the cover, the case features a subtle red LED lights that give the Primera a touch extravagant.
The I / O panel with the LED control, the two audio ports and four USB ports located on the right side of the lid, while the power button is at the front to find links on the lid. Removable dust filters are located in front of the front fans and the power supply.
Dimensions: 220 x 571 x 560 mm (W x H x D)
Weight: 9 kg
Material: steel, plastic
Form Factor: ATX, Micro-ATX,
Fan total possible:
3x 140/120 mm (front)
140 2x / 3x 120 mm (lid)
1x 140/120 mm (rear)
3x 140 mm (front, red LEDs)
1x 140 mm (rear)
Radiator Mountings (partial waiving HDD and / or fan slots):
1x max. 280/360 mm (front)
1x max. 280/360 mm (lid)
1x max. 140/120 mm (rear)
Filter: PSU (removable)
5x 2.5 inch (internal)
4x 2.5 / 3.5 inch (internal)
PSU 1x standard ATX (optional)
Expansion Slots: 7
I / O panel:
1x LED Controller
2x USB 3.0
2x USB 2.0
Maximum video card length: 419 mm
Maximum CPU cooler height: 180 mm
Maximum power supply Length: 240 mm