Silverstone SST-IG280-ARGB complete water cooling - 280mm [SST-IG280-ARGB]

280mm high-performance ARGB AIO liquid cooler with 2 x 140mm ARGB fans

The features of the Silverstone SST IceGem280 complete water cooling at a glance:
- Full block coverage to entirely cover the IHS of Ryzen Threadripper processor
- Pressure optimised fans with brighter ARGB effects can effectively dissipate heat from the radiator
- Scintillating diamond-cut design with SilverStone logo plating
- Integrated addressable RGB lighting for water block and fans
- Includes addressable RGB controller with 10 lighting modes and ability to adjust brightness and color changing speeds
- The pump motor utilises three phase, six pole design for smoother, quieter operation compared to most single phase, four pole design. Energy efficiency also improves as well
- Compatible with Intel LGA 115X/1366/1200/2011/2066 and AMD sTRX4/TR4/AM4/AM3/AM2/FM2/FM1 sockets

With the IceGem 280, Silverstone offers complete water cooling, which thanks to its 280 mm radiator offers a good balance between size and cooling capacity. The CPU cooling block with copper base plate fits common sockets from AMD and Intel. It conducts heat away from the processor quickly and effectively. The radiator itself is made of aluminium and is equipped with two fans.

Two 140 mm PWM fans with built-in RGB LED lighting are already included in the scope of delivery. These convey up to 168.54 m³ / h with a maximum of 1,600 revolutions per minute and generate a static pressure of 3.1 mmH2O. The resulting volume is limited to a maximum of 23.4 dB (A). The pump motor uses a three-phase, six-pole design for smooth system operation.

The CPU cooling block also has digitally addressable RGB-LED lighting. The lighting of the cooler and fans is controlled by the RGB controller included in the scope of delivery. The system is closed, filled at the factory and therefore completely maintenance-free.

Technical details:
Radiator:
- Dimensions: 140 x 314 x 28 mm (W x D x H)
- Material: Aluminium
Water block:
- Dimensions (without fan): 76 mm x 66 mm x 76 mm (W x H x D)
- Material: Copper (bottom), plastic (cover)
Pump:
- Speed: 3,000 (+/- 10%) rpm
- Nominal voltage: 12 V
- Rated Current: 0.42 A
- Connections: 2510 - 3 pin & 3 pin ARGB (5V LED)
Fan:
- Dimensions: 140 x 140 x 25 (W x D x H)
- Speed: max. 1,600 rpm
- Max Airflow: 99.2CFM
- Static pressure: 3.1 mm/H2O
- Volume: max. 23.4 dB (A)
- Rated voltage: 12 V
- Connector: 4 pin PWM & 3 pin ARGB (5V LED)

* Please check to make sure the control box and motherboard RGB port that you want to connect are the same as IG280-ARGB’s RGB port definition. Incorrect connection may cause malfunction or damage.