Silverstone Fara H1M Pro Micro-ATX Case, Tempered Glass - white [SST-FAH1MW-PRO]

- Three pre-installed ARGB fans give the case a unique finish
- Depending on your preference, air or water cooling possible
- Small to medium motherboards up to Micro-ATX format
- Graphics cards fit up to 320mm in length
- Four additional drives in the hard drive cage / behind motherboard tray
- Power supply cover structures the interior
- USB ports on the I/O panel: 1x USB 3.0 and 2x 2.0
- Make gaming more colorful with silverstone's Fara H1M Pro Micro ATX chassis

Rent gaming color with the Fara H1M Pro from Silverstone. The Micro ATX housing with steel supply air grille in honeycomb design on the front panel makes a color statement with the 120 mm ARGB fans. The aesthetics are only topped by the design. The magnetic dust filter and mesh inserts optimize cooling performance and airflow.

The Airflow: No headaches during installation
Silverstone makes it as easy as possible for you. The Fara H1M Pro already has three fans pre-installed, two in the front and one on the back. They promote the overpressure in the PC, at which a lot of excess air escapes from the PC through openings. So you don't have to buy any extra fans, the air cooling already works perfectly.

However, you also have the option of dispensing with a CPU cooler and using all-in-one water cooling. Radiators can be mounted in the front or back. They must not exceed the length of 240 mm at the front and 120 mm at the rear!

Good organization makes small enclosures big
The Silverstone Fara H1M Pro fits all motherboards up to the Micro-ATX format. CPU coolers must not be higher than 160 mm and graphics cards can fit up to 320 mm in length. class="important-info">Attention! This information only applies without the use of the fans in the front.

A total of four drives find their way into the case, as long as there are two 3.5-inch HDDs in the hard drive cage with two 2.5-inch SSDs behind the motherboard tray. Or you can dispense with the use of an HDD in favor of an SSD on the drive cage. In addition to the hard disk cage, a standard ATX power supply can be installed.

The Silverstone Fara H1M Pro Micro-ATX case distinguishes the power supply cover. It helps to sort cables better and thus keep the overall build of the PC clean.

All common connections can be found on the I/O panel
On the I/O panel you have easy and fast access to a USB 3.0 port, as well as two USB 2.0 ports. If your PC hangs up once or you want to restart it quickly for another reason, you will also find a button for it. HD audio is also provided! A microphone and headphones can be connected.

Enhance your look with RGB lighting
The Silverstone Fara H1M Pro comes with three ARGB fans pre-installed. Their special feature is that LEDs can be controlled individually, which results in great effects. In combination with the mesh front, this results in a stylish design, which is enhanced by further RGB components.

Specifications:
- Dimensions: 210 x 392 x 366 mm (W x H x D)
- Material: steel, tempered glass, plastic
- Weight: 4.6 kg
- Color: White
- Form factor: Micro ATX, Mini DTX, Mini ITX
- Total fans possible:
- Front: 2x 120mm, 2x 140mm
- Covers: 2x 120mm
- Back: 1x 120mm
Of which pre-installed:
- Front: 2x 120mm
- Back: 1x 120mm
- Radiator mounts:
- Front: 1x 120, 240mm
- Back: 1x 120mm
Drive bays:
- Hard Drive Cage: 2x 3.5 inch / 1x 3.5 and 1x 2.5 inch
- Motherboard tray: 2x 2.5 inch
- Expansion slots: 4 (horizontal)
I/O panel:
- 1x USB 3.0 (Type-A, USB 3.2 Gen 1, max. 5 Gbit/s)
- 2x USB 2.0 (Type-A, max. 480 Mbit/s)
- 2x 3.5 mm jack (3-pin, for microphone / headphones)
- 1 x power button
- 1 x reset button
- Maximum graphics card length: 320 mm (without installed front fans)
- Maximum graphics card width: 160 mm
- Maximum CPU cooler height: 160mm
 -Maximum power supply length: 250 mm (without hard drive cage), 160 mm (with hard drive cage)