Scythe Mugen SCMGD-1000 MAX CPU Cooler - 140mm [SCMGD-1000]

Here were all generations - from Mugen Mugen 1 to 4 - but always designed for 120 mm fan, which also always were already included. The Mugen MAX (SCMGD-1000) Scythe transmits the popular concept of Mugen for the first time in a different "weight class", the Mugen MAX has been enlarged and is now optimally designed for 140 mm rotors, such from the Glide Stream series with PWM connector is attached to it as a partner.

The cooling capacity of the Mugen MAX could be still increased compared to the Mugen 4, on the one hand because of the pure More of material on the other side but also because 140 mm fan can move more air at the same speed as their 120 counterparts . But this they also have a lower static pressure for which Mugen MAX but no problem, because between its 39 aluminum fins each 2.6 mm spacing are left, which allows a good airflow, even at low speeds.

The approximately 16 cm high and with a fan nearly 11 cm thick Mugen MAX is not unlike its little brothers, the tower cooler also comes with optimized TM.APS-lamellar structure and turns out on closer inspection to be made up of four towers built, the only by some Fins are connected in the middle. Each of the four towers is penetrated by three heat-pipe ends, six heatpipes with 6mm diameter increase from the total of nickel-plated copper base plate.

They are also nickel silver, which is a novelty for Scythe cooler. Just as the polished end plate, which covers the heatpipe ends and with the embossed Scythe double scythes logo means a great visual enhancement. A technical improvement represents the asymmetrical design of the cooling tower, which leave the heatpipes at such angles from the base plate, the heat sink offset from the RAM slots away stands (which of course does not apply LGA2011 motherboards) on the motherboard.

Thus, it can even use with front mounted fans are particularly high OC or modding RAM or replace easily. Effortlessly Also the mounting of the fan with two brackets and Scythe Mugen getaltet equipped the MAX even one more additional set of brackets to span an addition to acquiring fans (with 120 mm holes like the Glide Stream). Thanks HPMS mounting system, the mounting of the cooler on the CPU socket is very simple. *

That is why nearly all processor socket of the last years of Intel and AMD are supported. The 140s fan with the model name SY1425HB12M-P is automatically controlled by PWM of compatible motherboards in the speed and produces at minimum speed (500 r / min) only 13 dB (A), but can it at maximum revolutions of 1300 U / min whopping 165 m³ / h air wegscheffeln. The Scythe Mugen MAX thus means maximum cooling performance!

* Note: Please note that for mounting on motherboards with AMD socket the original backplate of the mainboard is required. Please check before buying if it exists.

Technical details:

     - Dimensions (without fan): 145 x 161 x 86 mm (W x H x D)
    -  Dimensions (with fan): 145 x 161 x 109 mm (W x H x D)
    -  Weight (without fan): about 687 g
     - Weight (with fan): about 837 g
     - -Material: vernickletes Copper (base plate, heat pipes), aluminum (fins)
      Heatpipes: 6x Ø 6 mm
     - Fan: 1x 140mm Glide Stream PWM (parentheses for an optional 2nd fan included)
     - Connector: 4-pin PWM
     - Speed: 500 - 1300 rpm / min
     - Volume: 13 to 30.7 dB (A)
     - Air flow: 63.5 to 165 m³ / h
    -  Static pressure: 0.15 to 1.02 mm H2O
     compatibility:
     - Intel socket 775, 1155, 1156, 1150, 2011
     - AMD socket AM2, AM2 +, AM3, AM3 +, FM1, FM2, FM2 +