SAPPHIRE GPRO 6200, 4096 MB GDDR5, 6x mini DP [32258-00-21G]

The Aerocool Qs-183 Advance Micro ATX enclosure at a glance:

Compact Micro ATX housing in black / red
Space for mainboards in micro ATX and mini ITX format
1x 5.25 "/ 3x 2.5" / 1x 3.5 "or 1x 5.25" / 2x 2.5 "/ 2x 3.5"
Pre-installed 80mm fan (two additional 120mm slots available)
I / O panel with 2x USB 3.0, HD audio ports & SD card reader
Graphics cards up to 320 millimeters in length
CPU coolers up to 150 millimeters in height
Compact micro-ATX housing with discreet design

The small tower is made of 0.5 mm thick SECC steel and is covered with plastic on the front and lid. The front panel houses a drive slot behind which a 5.25 inch slot conceals. There is also the I / O panel with two USB 3.0 ports, two audio jacks, an SD card reader and a power and a reset switch.

The entire black interior of the Qs-183 Advance has space for mainboards in the micro ATX and mini ITX format as well as some other components. For example, a 3.5-inch and a 2.5-inch drive can be installed as standard in the Qs-183 Advance.

The 3.5-inch drive can also be an external, since the slot sits behind a screen, which can be removed. In addition, two 2.5-inch drives or a 2.5-inch drive and a 3.5-inch drive can be installed on the fold-out small side wall.

If you do not use a 5.25-inch drive, you can also install a 3.5-inch drive in its place. To ensure that the drives do not generate any or only small vibrations, the housing is supplied with rubber pads.

The housing can accommodate a total of four expansion cards. These may have a maximum length of 320 mm. A CPU cooler may have a height of 150 mm. Of course, a section for installing and maintaining the CPU cooler in the side wall is also included here. A standard ATX power supply can be installed at the back of the enclosure. Underneath is a removable dust filter.

The case comes with a pre-installed 80mm fan in the back. For this purpose, a 120 mm fan can be installed in the side part and in the front. For optimum cable management, holes are left in the mainboard wall.

Technical details:
Dimensions: 170 x 335 x 355 mm (W x H x D)
Material: steel (body), plastic (front, cover)
Weight: approx. 2.7 kg
Color: Black / Red
Form Factor: Micro-ATX, Mini-ITX
Fan possible:
1x 120 mm (front)
1x 120 mm (left side part)
1x 80 mm (rear side)
Pre-installed fan:
1x 80 mm (backside: 1.800 rpm, 48 m³ / h, 21 dB (A))
Filter: Power supply (removable)
Drive Bays:
1x 5.25 "(external)
1x 3.5 inches (internal)
1x 2.5 inches (internal, ground)
2x 2.5 inches or 1x 3.5 + 1x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 4
I / O panel:
2x USB 3.0 (internal connection)
1x HD audio (In / Out)
1x SD card reader
Maximum graphics card length: 320 mm
Maximum CPU cooler height: 150 mm