In addition, the pre-installed 120mm fan has been equipped with a chic LED lighting and the mainboard tray with practical rubber grommets for better cable management. In terms of material selection, the case remains classic and continues to rely on high quality, anodised aluminum, creating a refined and subtle look. Only the right side of the case has a large side window made of tinted hard glass and interrupts the rest of the aluminum design.
The Raijintek Thetis Midi Tower at a glance:
Compact midi tower in anodised aluminum in black
Large side window made of tinted hard glass
Support for ATX, Micro ATX and Mini ITX motherboards
Graphics cards up to 28 cm and CPU coolers up to 17 cm
Space for two 2.5-inch and 3.5-inch disks each
Pre-installed 120mm fan with lighting included
Compact midi tower with wonderfully elegant design
Just like at the Styx, Raijintek now also combines Thetis wonderfully highest design art from Germany with a classic pure look and an attractive price / performance ratio. Externally, the Thetis is distinguished by its simple but elegant design in noble black, which is decorated on the front only by the manufacturer's logo and the illuminated power button. The slim aluminum case for ATX motherboards is made of 1.5 mm thick, anodised aluminum and measures 21.0 cm (width) by 36.6 cm (height without feet) by 36.0 cm (depth). The vertically oriented mainboard is located on a black painted steel partition. This version of the Thetis even has an extremely stylish side window made of 3 mm thick, tinted hard glass, which allows the installed hardware to be adequately presented.
RaiJintek has thus created a good balance between the smallest possible volume and still usable space available for potent hardware in the innovative design of the Thetis, thus combining an attractive flexibility in component selection with a still small footprint. The cleanly designed top (lid) accommodates the specially accessible I / O panel with two USB 3.0 ports as well as audio inputs and outputs. The ventilating concept on the inside provides for fresh air to be sucked in via the opening or an optional 120 mm fan on the ground and waste heat via the pre-installed 120 mm LED fan on the rear as well as two optional 120 mm Ventilator is removed from the cover. In addition, the power supply installed vertically behind the front panel blows in the full-value ATX format its waste heat down from the housing.
Instead of a housing fan, a 240 mm radiator for water cooling can be installed in the cover. Thetis also offers enough space to accommodate a total of two 2.5-inch and 3.5-inch disks each. Dual-slot gaming graphics cards can be up to 28 cm long in the Thetis and powerful CPU heatsinks in the tower format can easily be installed up to a height of 170 mm. So technology miracles become possible! On the underside are the stable feet, which also ensure good decoupling of vibrations.
Dimensions: 210 x 366 x 360 mm (W x H x D)
Material: aluminum, steel, hard glass
Weight: approx. 5.2 kg
Form Factor: ATX, Micro-ATX, Mini-ITX
1x 120 mm (rear, LED, pre-installed)
2x 120 mm (cover, optional)
1x 120 mm (floor, optional)
Radiator mountings (dispensing with fan slots):
1x 240 mm (cover)
1x 120 mm (rear side)
2x 3.5 inches (internal)
2x 2.5 inches (internal)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
I / O panel:
2x USB 3.0 (internal connection)
1x each audio in / out
Maximum graphics card length: 280 mm
Maximum CPU cooler height: 170 mm