RAIJINTEK SILENOS MS Pro Midi-Tower - white [0R20B00207]

 Visually, the Silenos MS Pro is particularly impressive thanks to the tempered glass that is used on the side window. In addition, there is solid equipment with two pre-installed 200 mm RGB LED fans on the front and another 120 mm on the rear as well as enough space for potent gaming hardware and extensive cooling solutions.

The Raijintek Silenos MS Pro-Midi-Tower at a glance:
- High quality and stylish midi tower in white
- Large tempered glass panel on the side
- Front with breathable mesh grille
- Lots of space for air or water cooling
- 2x 200 mm and 1x 120 mm fans with RGB lighting already pre-installed
- Space for a 360 or 280 mm radiator on the front or top
- Space for mainboards up to ATX form factor
- Graphics cards up to 320 mm in length
 -Design & Tempered Glass side windows in the Raijintek Silenos MS Pro-Midi-Tower

With the Raijintek Silenos MS Pro, it was quite obvious that the incentive and the self-claim was to design a fully-fledged housing that can accommodate a powerful gaming setup and is also a real eye-catcher. Raijintek relied on a high-quality and stable 0.6 mm steel chassis that was painted white. The case also has a large side window made of tempered glass, which allows an excellent view of the built-in hardware. The front is equipped with an air-permeable mesh grille to enable good airflow in the housing.

Air or water cooling in the Raijintek Silenos MS Pro
A pre-installed 120 mm fan on the rear is responsible for an active air flow, which is supported by two additional, gigantic 200 mm fans in the front. This already creates an excellent airflow that can also reliably cool down potent gaming hardware. All three built-in fans also have ring-shaped RGB lighting with digitally addressable LEDs, which looks particularly stylish. If necessary, the midi tower offers enough space to expand the air cooling to a total of six 120 mm fans or four 140 mm fans. Two 120s or 140s can also be attached to the lid. There is a honeycomb mesh and a magnetic dust filter above.

Thanks to the relatively large dimensions of the Midi-ATX-Tower, an effective water cooling system can also be built in. A radiator with 360 millimeters or 280 millimeters can be installed on the front, and there is enough space on the lid for a 280 mm or 240 mm radiator. Raijintek has integrated several options for attaching data carriers in the Silenos MS Pro. Two 3.5-inch or two 2.5-inch data carriers can be accommodated in a modular HDD cage under the power supply cover. A 2.5-inch data carrier can be installed on the rear of the mainboard tray, and two more on the front. There is also space for three 2.5-inch data carriers on the power supply cover.

Good equipment and plenty of space for gaming hardware
The inside of the Raijintek Silenos MS Pro proves to be pleasantly spacious, because in addition to the motherboard in the form factor ATX, Micro-ATX or Mini-ITX, powerful ATX power supplies, pixel cars up to 32 cm in length and CPU coolers up to 16.6 cm can be installed Height can be accommodated. The increased space behind the mainboard tray for easy cable management is also particularly useful.

Raijintek was able to set the overall usability very high with the Silenos MS Pro, because the dust filters are easy to remove and can be cleaned just as easily. In addition, the Silenos MS Pro is equipped with mainboard spacers and has a large cutout in the tray for easy cooler replacement. The I / O panel in the front part of the lid has two USB 2.0 ports, a USB 3.0 type A connector and an HD audio connector. The integrated controller for the digitally addressable RGB lighting of the fans can accommodate a total of six RGB components with standard 5VDG pins and is controlled via a switch on the I / O panel. Alternatively, the RGB lighting can also be connected directly to a suitably equipped mainboard.

Technical details:
- Dimensions: 270 x 500 x 465 mm (W x H x D)
- Weight: approx. 7.8 kg
- Material: steel, tempered glass, plastic
- Color white
 -Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 mm, 2x 140 mm or 2x 200 mm (front)
- 2x 120 mm or 2x 140 mm (cover)
- 1x 120 mm (rear)
- Pre-installed:
- 2x 200 mm (front)
 -1x 120 mm (rear)
- Radiator mountings:
- 1x 240/280/360 mm (front)
- 1x 240/280 mm (cover)
- 1x 120 mm (rear)
 -Filter: lid, bottom
- Drive bays:
- 2x 3.5 / 2.5 inches (internal) + 6x 2.5 inches (internal)
- Power supply: 1x standard ATX
- Expansion slots: 7
- I / O panel:
- 1x USB 3.0 type A, 2x USB 2.0
- 1x audio in
- 1x audio out
- 1x RGB-LED control
 -1x reset switch
- 1x power switch
- Maximum graphics card length: 320 mm
- Maximum CPU cooler height: 166 mm