RAIJINTEK SILENOS MS Pro Midi-Tower - black [0R20B00205]

Visually, the Silenos MS Pro is particularly impressive thanks to the hard glass that is used to cover the entire front and the side windows. In addition, there is solid equipment with two pre-installed 200 mm RGB LED fans on the front and another 120 mm on the back as well as enough space for potent gaming hardware and extensive cooling solutions.

The Raijintek Silenos MS Pro at a glance:
- High quality and chic midi tower in black
- Large mesh on the front
- Large tempered glass panel on the left
- Lots of space for air or water cooling
- 2x 200 mm and 1x 120 mm fans with RGB lighting already pre-installed
- Space for 360 or 280 mm radiator on the front or top
- Space for mainboards up to ATX form factor
- 2x 3.5-inch or 6x 2.5-inch data carriers
- CPU cooler with a maximum height of 166 mm
- Graphics cards up to 320 mm in length

Design & tempered glass side windows in the Raijintek Silenos MS Pro
With the Raijintek Silenos MS Pro, it was quite obvious that the incentive and self-claim was to design a full-fledged housing that can accommodate a powerful gaming setup and is also a real eye-catcher. Raijintek used a high-quality and stable 0.6 mm steel chassis that was painted black. The case also has a large tempered glass side window. The large mesh front enables optimal airflow. The side part and the front give the whole case a very elegant look and present the hardware in showcase style.

Air or water cooling in the Raijintek Silenos MS Pro
A pre-installed 120 mm fan on the rear is responsible for an active air flow, which is supported by two additional, gigantic 200 mm fans in the front. This already creates an excellent airflow that can also reliably cool down potent gaming hardware. All three built-in fans also have ring-shaped RGB lighting with digitally addressable LEDs, which looks particularly stylish. If necessary, the midi tower offers enough space to expand the air cooling to a total of six 120 mm fans or four 140 mm fans. Two 120s or 140s can also be attached to the lid. Above that there is a honeycomb mesh and an additional magnetic dust filter.

Thanks to the relatively large size of the Midi-ATX-Tower, an effective water cooling system can also be built in. A radiator with 360 millimeters or 280 millimeters can be installed on the front, and there is enough space on the lid for a 280 mm or 240 mm radiator. Raijintek has integrated several options for attaching data carriers in the Silenos MS Pro. Two 3.5-inch or two 2.5-inch data carriers can be accommodated in a modular HDD cage under the power supply cover. A 2.5-inch data carrier can be installed on the rear of the mainboard tray, and two more on the front.

Good equipment and plenty of space for gaming hardware
The interior of the Raijintek Silenos MS Pro, which weighs just under 7.8 kg, proves to be pleasantly spacious, because in addition to the motherboard in the form factor ATX, Micro-ATX or Mini-ITX, powerful ATX power supplies, pixel cars up to 32 cm in length and CPU Coolers up to 16.6 cm high can be accommodated. The increased space behind the mainboard tray for easy cable management is particularly useful.

Raijintek was able to set the overall usability very high with the Silenos MS Pro, because the dust filters are easy to remove and can be cleaned just as easily. The Silenos MS Pro is also equipped with mainboard spacers and has a large cutout in the tray for easy cooler replacement. The I / O panel in the front part of the cover has two USB 2.0 ports, a USB 3.0 type A connector and an HD audio connector. The integrated controller for the digitally addressable RGB lighting of the fans can accommodate a total of six RGB components with standard 5VDG pins and is controlled via a switch on the I / O panel. Alternatively, the RGB lighting can also be connected directly to a suitably equipped mainboard.

Technical details:
- Dimensions: 270 x 500 x 465 mm (W x H x D)
- Weight: approx. 7.8 kg
- Material: steel, tempered glass, plastic
- Color: Black
- Form factor: ATX, Micro-ATX, Mini-ITX
- Total fans possible:
- 3x 120 mm, 2x 140 mm or 2x 200 mm (front)
- 2x 120 mm or 2x 140 mm (cover)
- 1x 120 mm (rear)
- Pre-installed:
- 2x 200 mm (front)
- 1x 120 mm (rear)
- Radiator mountings:
- 1x 240/280/360 mm (30 mm depth, front)
- 1x 240/280 mm (65 mm depth, lid)
- 1x 120 mm (rear)
- Filter: lid, bottom
- Drive bays:
- 2x 3.5 / 2.5 inch (internal)
- 3x 2.5 inches (internal)
- Power supply: 1x standard ATX
- Expansion slots: 7
- I / O panel:
- 1x USB Type C
- 2x USB 3.0 type A
- 1x HD audio
- 1x RGB-LED control
- 1x reset switch
- 1x power switch
- Maximum graphics card length: 320 mm
- Maximum CPU cooler height: 166 mm