This pack contains six Pelias fittings, all of which have built-in LEDs and can be controlled by the included LED controller for brightness, color and effect. An absolute must-have for a unique custom water cooling system.
The Raijintek Pelias RGB LED fittings at a glance
- Practical set of 6 with LED controller
- Made of high quality copper (black)
- Integrated LEDs for direct illumination of the hard tubes
- 7 different lighting colors and 20 effects possible
- Suitable for hard tubes with 14 mm OD
- G1 / 4-inch connector with external thread
- Hardtubes perfectly lit thanks to Raijintek Pelias RGB LED fittings
In contrast to conventional fittings, a supplied RGB LED ring with outer seals and union nut (later not visible from outside) is plugged into the tube connection before a Wakü tube is pushed there. The latter is then sealed by two inner seals on the connection. The integrated LEDs then illuminate the tube at the cut edge, creating the impression that there is a fluorescent liquid inside the wakü tubes.
This set consists of a total of six black copper fittings, which are equipped with RGB LED lighting and can perfectly illuminate the interior of hard tubes. There are a total of 7 different colors available, which can be configured in addition to the brightness via the included LED controller. Even effects such as a continuous color change can be adjusted.
Each fitting is fitted with a G1 / 4-inch male thread and a hard-tube fitting, the latter capable of holding stable 14-millimeter Wakü tubes. Thanks to double locking with two sealing rings, these connections are also absolutely leakproof.
Note: This set contains no hard tubes. Any pictures with hard tubes or systems are for illustrative purposes only.
- Diameter: 22 mm
- Height: 30.3 mm
- Material: copper
- Weight: 440g
- Connection (per fitting):
- 1x G1 / 4-inch external thread
- 1x connection for Hardtubes
- Compatibility: Hard tubes with 14 mm outer / inner diameter
- 6x Pacific RGB LED fittings
- 1x LED controller
- 1x infrared remote control